Complete the following stepped out solution to set that
To set up a new router, follow these steps:
1. Begin by unpacking the router and all of its accessories. Make sure you have the router itself, a power adapter, an Ethernet cable, and any other included items.
2. Find a suitable location for the router. It should be placed in a central location within your home or office, away from other electronics and obstructions. It's also important to place it at an elevated position, such as on a desk or shelf, for optimal signal coverage.
3. Connect the power adapter to the router and plug it into a nearby power outlet. Ensure that the power supply is stable and reliable.
4. Locate the WAN (Wide Area Network) port on the router. It is usually labeled and separate from the other LAN (Local Area Network) ports. Connect one end of the provided Ethernet cable to this WAN port.
5. Identify the modem provided by your internet service provider (ISP). Connect the other end of the Ethernet cable to the modem's Ethernet port. This establishes a connection between the router and the modem.
6. Connect your computer or device to the router using another Ethernet cable. Plug one end into an available LAN port on the router and the other end into the Ethernet port on your device.
7. Once the physical connections are set up, power on the router and your modem. Wait for them to fully initialize.
8. Open a web browser on your computer or device that is connected to the router. In the address bar, type the default IP address of the router. This information can usually be found in the router's manual or on its label. Press Enter to access the router's administration page.
9. You will be prompted to enter a username and password to log in to the router's administration interface. Consult the manual or documentation provided with the router to obtain the default login credentials. Enter them and click "Login" or similar.
10. Once logged in, you can configure various settings on the router, such as a new network name (SSID) and password, security settings, and any other desired options. Consult the router's manual for specific instructions on how to set up these settings.
11. Once you have configured the desired settings, click "Apply" or "Save" to save the changes. The router may need to restart for the new settings to take effect.
12. Disconnect the Ethernet cable from your computer or device and try connecting to the Wi-Fi network with the new network name (SSID) and password that you set up.
You have successfully set up your new router! Enjoy your internet connection with the improved coverage and security provided by your new device.