Use the table to answer the question. x y 0 4 1 2 2 0 Graph the points in the coordinate plane from the data values in the table. (1 point) y 0 4 1 2
The graph of the points in the coordinate plane from the data values in the table would look like this:
(0,4)
(1,2)
(2,0)
Here is the graph:
{{{graph(300, 200, -2, 4, -2, 6, 4, 2, 0)}}}
To graph the points from the data values in the table, we can plot the x and y values as coordinates on a coordinate plane. Here's how you can do it step-by-step:
1. Draw a coordinate plane with x and y axes.
|
----|----
|
|
|
2. Label the x-axis and y-axis of the coordinate plane.
|
----|----
| y
|
|
x
3. Plot the points from the table on the coordinate plane. For each x value, locate the corresponding y value and plot the coordinate point.
- For the point (0, 4): Start at the origin (where the x and y axes intersect), and move 0 units to the right along the x-axis. Then move 4 units up along the y-axis. Mark this point on the coordinate plane.
- For the point (1, 2): Start at the origin, move 1 unit to the right along the x-axis, and then move 2 units up along the y-axis. Mark this point on the coordinate plane.
- For the point (2, 0): Start at the origin, move 2 units to the right along the x-axis, and then move 0 units up along the y-axis. Mark this point on the coordinate plane.
Your graph should look like this:
|
----|----
| y
(2,0)
|
(1,2)
|
(0,4)
Hope this helps! Let me know if you have any further questions.
To graph the points from the given table on a coordinate plane, you will use the x-values as the independent variable (on the x-axis) and the y-values as the dependent variable (on the y-axis). Here are the points from the table with the x-values as the independent variable and the y-values as the dependent variable:
(0, 4)
(1, 2)
(2, 0)
Now, plot these points on the coordinate plane. Start by locating the x-value on the x-axis and then move vertically to locate the corresponding y-value on the y-axis. Finally, mark the point where the vertical and horizontal lines intersect.
After plotting all the points, you will have a graph with the points (0, 4), (1, 2), and (2, 0). Connect these points with a line to represent the relationship between the x and y values.
Your graph will look like this:
|
4 | ●
|
3 |
|
2 | ●
|
1 |
|
0 | ●
|_________________
0 1 2 3 4 5 (x-axis)