use the table to answer the question.
X:0, 1, 2
y:4, 2, 0
Graph the points in the coordinate plane from the data values in the table.
To graph the points from the table, we plot the values of X on the x-axis and the values of Y on the y-axis.
The first point is (0, 4), the second point is (1, 2), and the third point is (2, 0).
Now we plot these points on the coordinate plane:
The point (0, 4) is plotted at the origin (0,0) and moves up 4 units on the y-axis.
The point (1, 2) is plotted 1 unit to the right of the origin on the x-axis and moves down 2 units on the y-axis.
The point (2, 0) is plotted 2 units to the right of the origin on the x-axis and stays on the x-axis.
Finally, we connect the points with a line.
The graph of the points is:
|
4 |
| (0,4)
|
2 | (1,2)
|
0 |__________________(2,0)
0 1 2
To graph the points from the given table, plot each (x, y) pair on a coordinate plane.
The given data values in the table are:
X: 0, 1, 2
Y: 4, 2, 0
The x-values represent the horizontal coordinates, while the y-values represent the vertical coordinates.
First, plot the point (0, 4). This means that when x is 0, y is 4.
Next, plot the point (1, 2). This means that when x is 1, y is 2.
Finally, plot the point (2, 0). This means that when x is 2, y is 0.
After plotting all three points, connect them to form a line.
To graph the points from the table, you will plot the values of X as the x-coordinates and the corresponding values of Y as the y-coordinates on the coordinate plane.
Using the given table:
X: 0, 1, 2
Y: 4, 2, 0
These are the coordinates for three points: (0, 4), (1, 2), and (2, 0). To graph these points on the coordinate plane, follow these steps:
1. Draw the x-axis horizontally and the y-axis vertically on a piece of graph paper, intersecting at the origin (0, 0).
2. Locate the point (0, 4) on the coordinate plane, where the x-coordinate is 0 and the y-coordinate is 4. Place a point at this position.
3. Locate the point (1, 2) on the coordinate plane, where the x-coordinate is 1 and the y-coordinate is 2. Place a point at this position.
4. Locate the point (2, 0) on the coordinate plane, where the x-coordinate is 2 and the y-coordinate is 0. Place a point at this position.
5. Connect the three points with a line segment to display the graph of the data values.
The resulting graph should show a line going from the point (0, 4) to the point (2, 0), passing through the point (1, 2).