Plot the following points:
5,0
0,5
Here is a plot of the points (5,0) and (0,5):
The x-coordinate 5 is plotted on the x-axis, and the y-coordinate 0 is plotted on the y-axis. This results in a point on the x-axis, 5 units to the right of the origin.
Similarly, the x-coordinate 0 is plotted on the x-axis, and the y-coordinate 5 is plotted on the y-axis. This results in a point on the y-axis, 5 units above the origin.
The two points are plotted as shown below:
(5,0) ●
(0,5) ●
The x-axis runs horizontally and the y-axis runs vertically, intersecting at the origin (0,0). The point (5,0) is to the right of the origin at location 5 on the x-axis, and the point (0,5) is above the origin at location 5 on the y-axis.
what is the simple answer
The simple answer is that the point (5,0) is plotted on the x-axis, 5 units to the right of the origin, and the point (0,5) is plotted on the y-axis, 5 units above the origin.
To plot the points (5,0) and (0,5), you will need a coordinate plane. The x-coordinate (first number) represents the horizontal position, while the y-coordinate (second number) represents the vertical position.
1. Draw two perpendicular lines intersecting at a point, forming a "+" sign. These lines will serve as the x-axis and y-axis.
2. Label the x-axis with numbers increasing from left to right and the y-axis with numbers increasing from bottom to top.
3. Locate the point (5,0) on the x-axis. Start from the origin (where the x-axis and y-axis intersect) and move 5 units to the right. Mark this point with a dot.
4. Locate the point (0,5) on the y-axis. Start from the origin and move 5 units upwards. Mark this point with a dot.
5. Connect the dots for each point. You can use a straight line to connect the dots for a more accurate representation.
After following these steps, you should have a graph with two points plotted. The point (5,0) will be on the x-axis, 5 units to the right of the origin, and the point (0,5) will be on the y-axis, 5 units above the origin.
To plot the given points (5,0) and (0,5), you can follow these steps:
1. Take a blank sheet of graph paper or use any drawing software that allows you to draw a coordinate plane.
2. Label the x-axis (horizontal axis) and y-axis (vertical axis) and mark the appropriate scales.
3. Locate the first point (5,0) on the graph. To do this, move horizontally from the origin (0,0) to the right 5 units along the x-axis. Then, move vertically along the y-axis, but since the y-coordinate is 0, you won't move up or down. Mark this point on the graph.
4. Locate the second point (0,5) on the graph. Start at the origin (0,0). Move vertically upwards along the y-axis by 5 units. Since the x-coordinate is 0, you won't move left or right. Mark this point on the graph.
5. Connect the two points with a straight line to visualize the line on the graph.
By following these steps, you should now have plotted the given points (5,0) and (0,5) on the graph.