Credence would like to set up a wireless, DSL network for his home. He would
like to keep his landline working while he is online as well. Explain how he
should go about setting up this network. Include all of the devices and
cables that he will need.
To set up a wireless DSL network while keeping the landline working, Credence will need the following devices and cables:
1. DSL modem: This device connects to the telephone line and converts the DSL signal into data that can be used by devices connected to the network. It usually comes with an Ethernet port for wired connections.
2. Wireless router: Credence will need a wireless router that supports DSL connections. The router connects to the DSL modem and acts as the central hub for the network. It allows multiple devices to connect wirelessly to the internet.
3. Ethernet cable: Credence will need an Ethernet cable to connect the DSL modem to the wireless router. This cable transfers the internet signal from the modem to the router. It's usually included with the modem or router.
4. Telephone cable: Since Credence wants to keep his landline working, he'll need a telephone cable to connect the DSL modem to the telephone line. This cable allows the modem to receive DSL signal from the telephone line and also enables the landline to function.
5. Power cables: Both the DSL modem and wireless router require power to operate. Plug them into electrical outlets using their respective power cables.
Setup steps:
1. Connect the telephone cable from the telephone wall jack to the DSL modem's DSL port.
2. Connect one end of the Ethernet cable to the Ethernet port on the back of the DSL modem.
3. Connect the other end of the Ethernet cable to the WAN or Internet port on the wireless router.
4. Plug both the DSL modem and wireless router into separate electrical outlets using their power cables.
5. Configure the wireless router's settings according to the manufacturer's instructions (usually done via a web interface). This includes setting up a network name (SSID) and password for wireless access.
6. Once the wireless router is set up, devices such as smartphones, laptops, and tablets can connect to the network wirelessly using the provided SSID and password.
By following these steps and using the mentioned devices and cables, Credence can successfully set up a wireless DSL network while keeping his landline working.
To set up a wireless DSL network while keeping the landline working, Credence will need the following devices and cables:
1. DSL modem: Credence will need a DSL modem to establish an internet connection. This device will connect to the DSL line that comes into his home and convert the DSL signal into a usable internet connection.
2. Wireless router: Credence will need a wireless router to create a wireless network within his home. This device will allow multiple devices to connect to the internet wirelessly.
3. Ethernet cables: Credence will need Ethernet cables to connect his DSL modem and wireless router. One end of the Ethernet cable will connect to the DSL port on the modem, and the other end will connect to the WAN or internet port on the router.
4. Phone splitter: To keep the landline working while connected to the DSL network, Credence will need a phone splitter. This device will divide the DSL signal from the phone signal, allowing him to connect both the DSL modem and a landline phone to the same phone line.
5. Phone cable: Credence will require a phone cable to connect the splitter to his landline phone.
Now, let's go through the steps to set up the network:
Step 1: Connect the DSL modem to the phone line:
- Plug one end of the phone cable into the DSL port on the modem.
- Connect the other end of the phone cable to the phone jack on the wall.
Step 2: Connect the DSL modem to the wireless router:
- Take one end of the Ethernet cable and connect it to the LAN port on the modem.
- Connect the other end of the Ethernet cable to the WAN or internet port on the router.
Step 3: Connect the landline phone:
- Connect the phone splitter to the phone line using a phone cable.
- Connect one end of the phone cable to the "Phone" port on the splitter.
- Connect the other end of the phone cable to the landline phone.
Step 4: Power on the devices:
- Plug in the DSL modem and let it fully boot up.
- Plug in the wireless router and wait for it to fully boot up as well.
Step 5: Configure the wireless network:
- Access the router's administration panel from a connected device by entering the router's IP address in a web browser.
- Follow the instructions provided by the router's manufacturer to set up a wireless network, including the network name (SSID) and password.
Once these steps are completed, Credence will have a wireless DSL network set up in his home while keeping his landline working. The devices and cables mentioned above are essential for this setup.
To set up a wireless DSL network while keeping the landline working, Credence will need the following devices and cables:
1. A DSL Modem: This device connects the DSL line from the internet service provider (ISP) to your home. It typically has an RJ11 port for the DSL line connection.
2. Wireless Router: This device allows multiple devices to connect to the internet wirelessly. It usually has multiple LAN ports for wired connections and an RJ11 port to connect to the DSL modem. Credence will need a wireless router that supports both DSL and landline connections.
3. Ethernet cable: Credence will need an Ethernet cable to connect the DSL modem to the wireless router. These cables have RJ45 connectors on each end and are typically included with the modem or router.
4. Telephone cable: This cable is used to connect the landline phone to the wireless router. It has an RJ11 connector on each end. If Credence's router does not have a built-in phone jack, he will need a router with a phone jack or an adapter that allows him to connect the landline phone.
Now, let's go through the steps to set up the network:
1. Plug the DSL line into the DSL port on the DSL modem.
2. Connect one end of the Ethernet cable to the Ethernet port on the DSL modem, and the other end to the WAN port on the wireless router.
3. If your router has a built-in phone jack, connect the landline phone directly to the phone jack on the router. Skip the next step.
4. If your router doesn't have a built-in phone jack, connect the landline phone to the router using a telephone cable. Plug one end of the telephone cable into the landline phone and the other end into the router's phone jack or the adapter.
5. Power on the DSL modem and wait for it to establish a connection with the ISP. This process may take a few minutes (refer to the modem's user manual for specific details).
6. Power on the wireless router. Allow it a few minutes to establish a connection with the modem and set up the wireless network. Consult the router's user manual for the initial setup process.
Once the wireless DSL network is set up, Credence should be able to connect to the internet wirelessly while also having his landline phone working simultaneously.