Questions LLC
Login
or
Sign Up
Ask a New Question
Physics and Engineering
Digital Signal Processing
Direct Digital Synthesis (DDS)
Determine the output frequency fout of a DDS system having 32-bit phase accumulator if DDS clock frequency fclk is 120 kHz and the value of the frequency tuning code M is 196608. Show your work.
1 answer
fout = (M * fclk) / 2^32
fout = (196608 * 120 kHz) / 2^32
fout = 0.732 Hz
You can
ask a new question
or
answer this question
.
Related Questions
Neela's clock is broken the minute hand rotates around the clock correctly but the hour hand is stuck in the three o'clock
Why is the step of “Access to system given” in a rectangle symbol? Source: QBS. Pearson Education Ltd (1 point) Responses
TIM7 is used to generate time base interrupts to implement the DDS clock frequency of 100 kHz. Determine the values of TIM7 ARR
The pendulum on a cuckoo clock is 5.00 cm long. (a) Determine the period of this pendulum. (b) What is its frequency?
The following signal is sampled by 12-bit ADC triggered by timer TIM7. The timer clock frequency is 80 MHz. The value of
An analog signal is sampled by 12-bit ADC triggered by timer TIM7. The timer clock frequency is 80 MHz. The value of TIM7_PSC
The following signal is sampled by an ADC triggered by timer TIM6. The timer clock frequency is 80 MHz. The value of TIM6_PSC
1. An 7-bit counter is wired as follows: The CLK input to the first stage (LSB) is the system clock. Each stage's output is used
John’s clock is broken. The minute hand rotates around the clock correctly, but the hour hand is stuck in the three o’clock
Determine the values of timer TIM7 prescaler (PSC) and autoreload (ARR) registers so set timer overflow period to 100 ms, if