how will you seperate water salt wood shavings small pins and marbles in 5 steps
All put in the metal bowl.
Pick up wooden pieces that floated to the top bowl.
Harm water to swell to start boiling.
At the end of the distillation measure weight of distilled water.
Measure weight of salt.
If you're not interested for measurement:
All put in the metal bowl.
Pick up wooden pieces that floated to the top bowl.
Harm water to swell to start boiling.
Distilled water take in a special bottle.
Separate marbles from salt.
To separate water, salt, wood shavings, small pins, and marbles, you can follow these five steps:
Step 1: Using a sieve or filter, separate the wood shavings from the mixture. The sieve or filter will allow the small wood particles to pass through while retaining the larger components.
Step 2: Add water to the remaining mixture containing salt, small pins, and marbles. Stir the mixture thoroughly to dissolve the salt in water.
Step 3: Once the salt is dissolved, use a magnet to separate the small pins from the mixture. The pins are typically made of ferrous material, so the magnet will attract them while leaving the rest of the mixture behind.
Step 4: Carefully pour the liquid mixture (saltwater) into a container and allow it to sit undisturbed for some time. This will give the salt particles a chance to settle at the bottom of the container, while the marbles will remain suspended in the liquid.
Step 5: Gently pour off the liquid portion from the container, being careful not to disturb the settled salt particles. As a result, you will be left with the separated salt at the bottom and the marbles in the liquid.
It's important to note that this separation method assumes the wood shavings, small pins, and marbles have distinct sizes and the small pins are attracted to magnets. Additionally, the separation technique may vary depending on the specific materials involved, so adjust the steps as needed.