FLUID MECHANICS

For oil (SG =0.86 and μ = 0.025 Ns/m2) flow of 0.5 m3/s through a round pipe with
diameter of 500 mm, determine the Reynolds Number. Determine also whether
the flow is laminar or turbulent.

  1. 👍 0
  2. 👎 0
  3. 👁 66
asked by ANNA

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    Lubricating oil, with a relative density of 0.79, flows around a 90¨¬ bend. The pipe diameter is 0.45m, and the oil has a pressure head of 7m and the flow is 1.7m3/s. Find the force exerted by the oil on the bend. Oil density =

    asked by Henri on April 22, 2009
  2. Physics

    Lubricating oil, with a relative density of 0.79, flows around a 90¨¬ bend. The pipe diameter is 0.45m, and the oil has a pressure head of 7m and the flow is 1.7m3/s. Find the force exerted by the oil on the bend. Oil density =

    asked by Henri on April 23, 2009
  3. Chemistry

    X2 + Y2 2XY 0.50 mole each of X2 and Y2 are placed in a 1.0 litre vessel and allowed to reach equilibrium at a given temperature. The equilibrium concentrations of XY is found to be 0.025 mol/L. What is the equilibrium cosntant

    asked by Janna on May 15, 2007
  4. physics

    Lubricating oil, with a relative density of 0.79, flows around a 90¨¬ bend. The pipe diameter is 0.45m, and the oil has a pressure head of 7m and the flow is 1.7m3/s. Find the force exerted by the oil on the bend. Oil density =

    asked by Michel on April 2, 2009
  5. physics

    A horizontal pipe carries oil whose coefficient of viscosity is 0.00010 ns/ m^{2}}. The diameter of the pipe is 5.5 cm, and its length is 60 m. What pressure difference is required between the ends of this pipe if the oil is to

    asked by Dave on January 26, 2012
  6. Physics

    In a huge oil tanker, salt water has flooded an oil tank to a depth of h2 = 4.50 m. On top of the water is a layer of oil h1 = 7.55 m deep, as in the cross-sectional view of the tank as shown in the figure. The oil has a density

    asked by Courtney on October 28, 2014
  7. Fluids in motion

    Lubricating oil, with a relative density of 0.79, flows around a 90º bend. The pipe diameter is 0.45m, and the oil has a pressure head of 7m and the flow is 1.7m3/s. Find the force exerted by the oil on the bend.

    asked by Henri on March 20, 2009
  8. physics

    crude oil is contained in an iron cylindrical tank whose height is 6m and diameter of the base is 5m. at 0c, the level of crude oil is 20cm below the brim. at what temp will the oil start to over flow from the tank

    asked by evans on June 19, 2016
  9. PHYSICS

    Oil is flowing with a speed of 1.30 m/s through a pipeline with a radius of 0.315 m. How many gallons of oil (1 gal = 3.79 10-3m3) flow in one day?

    asked by Zach on April 14, 2008
  10. another physics pbs

    Oil is flowing with a speed of 1.24 m/s through a pipeline with a radius of 0.299 m. How many gallons of oil (1 gal = 3.79 multiplied by 10-3m3) flow in one day?

    asked by myra ko on November 30, 2008

More Similar Questions