Math

In first gear, or low gear, an automobile's engine runs about three times as fast as the drive shaft. In second gear, the engine does not have to run as fast; usually it runs about 1.6 times faster than the drive shaft. Finally, in third, or high gear, the engine runs at the same speed as the drive shaft.

Suppose an engine is running 2,000 r.p.m. in second gear. How fast is the drive shaft running?

Drive shaft rotation = r.p.m.

asked by bob
  1. i need the answer i don't wanna answer my own dang question

    posted by yaaaaa
  2. 1850

    posted by Anonymous

Respond to this Question

First Name

Your Response

Similar Questions

  1. math

    In first gear, or low gear, an automobile's engine runs about three times as fast as the drive shaft. In second gear, the engine does not have to run as fast; usually it runs about 1.6 times faster than the drive shaft. Finally,
  2. Precalculus

    A vehicle has an engine that is connected directly to a gear box. In the highest gear, a 2 inch radius gear is turning a 14 inch diameter gear. This gear is connected to the drive shaft. The drive shaft attaches to a wheel and a
  3. Precalc

    A vehicle has an engine that is connected directly to a gear box. In the highest gear, a 2 inch radius gear is turning a 14 inch diameter gear. This gear is connected to the drive shaft. The drive shaft attaches to a wheel and a
  4. Algebra

    Bambi is restoring a clock with a broken gear. A fragment of the small gear has 5 teeth . a larger unbroken gear has 18 teeth and is 2cm in dia.She knows that for every 2 times the large gear turns the smaller gear turns 3 times.
  5. Pre-Calc

    A vehicle has an engine that is connected directly to a gear box. In the highest gear, a 2 inch radius gear is turning a 14 inch diameter gear. This gear is connected to the drive shaft. The drive shaft attaches to a wheel and a
  6. Intergated chemistry/physics

    Draw a setup containing 3 gears. For every turn of the input gear, you need the output gear to spin 9 times. The drawing doesn't have to be perfect, but make sure to label the input gear, the output gear, and the number of teeth
  7. science

    A gear with 30 teeth turns a gear with 5 teeth. How many turns will the driven gear turn for every turn the drive gear makes? Is this type of gear train usedto increase force or speed and distance? The tumber of teeth engaged is
  8. 9th grade science

    if the turns of the output gear over the turns of the input gear is equal to the number of teeth on the input gear over the number of teeth on the output gear, the input gear has 36 teeth and the output has 10, the output gear has
  9. value

    if gear A has 3 teeth and drives gear B with 75teeth,how many times does gear A rotate for each rotation of B?
  10. drive-ing problem

    hi this is my problem... A shaft turning at the 1800 r/min is coupled to a gear with 80 teeth, matching a gear with 62 teeth. In turn this gear is fitted to an intermediate shaft driving a gear with 40 teeth. This gear in turn

More Similar Questions