Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Force and Motion
A pulley with diameter D = 27in weighs 80 lb. It is mounted on a diameter d = 2-in axle. A weight of 1000 lb is to be lifted. If the coefficient of friction f = 0.1, what vertical pull force P will be needed?
1 answer
nothing
You can
ask a new question
or
answer this question
.
Related Questions
the normal acceleration of a particle on the rim of a pulley 10 ft in diameter is constant @ 8000 ft/s^2. determine the speed of
A pulley whose diameter is 9 inches is connected by a belt to another pulley whose diameter is 6 inches. If the larger pulley
Find the diameter of a pulley which is driven at 360 rpm by a belt moving at 40 ft/s.
Then in 1 s the pulley turns through an
1. Determine the effort required to lift a load of 100 N using:
(a) Using a single fixed pulley (b) A single movable pulley (c)
find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm
A pulley revolving at 200 revolutions per minute has a diameter of 15 inches. It is belted to a second pulley which revolves at
Two pullies are connected by a belt, Pulley A has a radius of 3 cm and pulley B has a radius of 6cm. As Pulley A rotates, a drop
A pulley with a diameter of 24 inches is driven by a belt which is moving 1045 ft/min. How many revolutions per minute are made
A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner
The pulley in the jib of a crane has a diameter of 56cm. Find:
a) The circumference of the pulley b) The number of revolutions