physics

A grinding wheel 0.28 m in diameter rotates at 2400 rpm. What is the acceleration of a point on the edge of the grinding wheel?

  1. 👍
  2. 👎
  3. 👁
  1. a=w^2 *r

    in SI units, w= 2400rpm * 1min/60sec*2PIrad/revolution= 251rad/sec

    1. 👍
    2. 👎
    👤
    bobpursley

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A 4.50-kg wheel that is 34.5 cm in diameter rotates through an angle of 13.8 rad as it slows down uniformly from 22.0 rad/s to 13.5 rad/s. What is the magnitude of the angular acceleration of the wheel? A) 0.616 rad/s 2 B) 22.5

  2. Physics

    A potter’s wheel with rotational inertia of 45 kg m2, is spinning freely at 40 rpm. The potter drops a lump of clay onto the wheel where it sticks a distance 1.2 m from the rotational axis at the wheel’s center. If the

  3. physics

    A space station, in the form of a wheel 110 m in diameter, rotates to provide an "artificial gravity" of 3.00 m/s2 for persons who walk around on the inner wall of the outer rim. Find the rate of rotation of the wheel (in

  4. physics

    A small rubber wheel is used to drive a large pottery wheel, and they are mounted so that their circular edges touch. The small wheel has a radius of 1.7 cm and accelerates at the rate of 6.9 rad/s^2, and it is in contact with the

  1. Physics

    An electric motor rotating a workshop grinding wheel at a rate of 95 rev/min is switched off. Assume the wheel has a constant negative angular acceleration of magnitude 2.40 rad/s2. (a) How long does it take for the grinding wheel

  2. Physics

    At time t=0 a grinding wheel has an angular velocity of 26.0 rad/s. It has a constant angular acceleration of 25.0 rad/s^2 until a circuit breaker trips at time t = 2.50 s. From then on, the wheel turns through an angle of 440 rad

  3. Physics

    A wheel starts from rest and rotates about its axis with constant angular acceleration. After 8.7s have elapsed, it has rotated through an angle of 20 radians. What is the angular acceleration of the wheel? What is the angular

  4. Physics

    A wheel with radius of 25cm turning at 120 rpm uniformly increases its frequency to 660 rpm in 9s. Determine: i) the centripetal acceleration ii)the total acceleration of the system

  1. dynamics

    In a amusement park ride, gondola cars of weight W are attached by rods 24ft long to a bull wheel 16ft in diameter. The bull wheel rotates in a horizontal plane about a vertical axis at its center. At how many rpm is it rotating

  2. Math

    a ferris wheel with a 40-ft diameter rotates once every 30 seconds. the bottom of the wheel is located 1.5 feet above the ground. you get on at the very bottom of the ferris wheel at time t = 0 and then the ferris wheel begins to

  3. physics help please!!!

    What is the angular momentum of a 2.5 kg uniform cylindrical grinding wheel of radius 19 cm when rotating at 1200 rpm? And how much torque is required to stop it in 5.7 s? Need help with step-by-step explanation.

  4. Physics

    A potter’s wheel with rotational inertia 24 kg m2 is spinning freely with no friction at 50 rpm. A piece of clay is dropped from above the wheel and sticks 0.5 m from the center of the wheel. Afterward, the rotational speed of

You can view more similar questions or ask a new question.