# PHYSICS NEED HELP FAST

A 150KG STEEL ROD IN A BUILDING UNDER CONSTRUCTION SUPPORTS A LOAD OF 6050KG. DURING THE DSY THE RODS TEMP. INCREASES FROM 22C TO 47C CAUSING THE ROD TO THERMAALLY EXPAND AND RAISE THE LOAD 5.5mm. FIND THE EGERHU TRANSFER AS HEAT TO OR FROM THE ROD. THE SPECIFIC HEAT CAPACITY OF STEEL IS THE SAME AS FOR IRON.
b. FIND THE WORK DONE IN THIS PROCESS. IS WORK DONE ON OR BY THE ROD?
c. HOW GREAT IS THE CHANGE IN THE RODS INTERNAL ENERGY? DOES THE RODS INTERNAL ENERGY INCREASE OR DECREASE?

1. 👍 0
2. 👎 0
3. 👁 544

## Similar Questions

1. ### Physics

The efficiency of a machine is 60℅,find In joules the work done by a student using the machine to rise a load of 150kg through a vertical distance or 2.5 m (g=10m/s2)

2. ### chemistry

100 mL of is initially at room temperature (22)C. A chilled steel rod at 2 C is placed in the water. If the final temperature of the system is 21.2 C, what is the mass of the steel bar? Specific heat of water = 4.18J/g(C) Specific

3. ### physics

A commonly used method of fastening one part to another part is called "shrink fitting." A steel rod has a diameter of 2.0046 cm, and a flat plate contains a hole whose diameter is 2.0000 cm. The rod is cooled so that it just fits

4. ### Physics

Composite bar with end load (two segments) The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2L=2 m and radius R=1 cm and a sleeve of steel of length L=1 m and thickness R=1 cm

1. ### Physics

The efficiency of a machine is 60% and it is used to raise a load of 150kg through a vertical distance of 2.5m (J = 10m/ ).Find in joules the work done.

2. ### solid mechanics 1

a load p is supported by a steel pin that has been inserted in a short wooden member hanging from the ceiling. the ultimate strength of the wood used is 60 MPa in tension and 7.5 MPa in shear, while the ultimate strength of the

3. ### physics

A steel rod of length 1m is heated from 25°c to 75°c keeping its length constant.The longitudinal strain developed in the rod is:(steel:12 X 10^-6/°c) "6X10^-4" ; "-6X10^-4" ; "0" please help me as soon as possible by explain

4. ### math

A steel post is 6 ft. long and 6" thick in diameter. If a cubic foot of steel weighs 490 lb., how much does the rod weigh (to the nearest pound)?

1. ### Science

A uniform rod 1 metre long weighing 50N is supported horizontally on two knife edges placed 10cm each from its ends. What will be the reactions at these supports when 100N weight is suspended 10cm from the midpoint of the rod?

2. ### Engineering

Steel column is 80 feet tall. Column is a W 14 x 730(wide-flange beam) The cross sectional area is 215 sq in. Supports a floor load of 6600 K. Determine the stress in the column and how much it will shorten due to the 6600K load.

3. ### physics

A rigid rod holds a restaurant sign horizontally from the side of a building. The force due to gravity acting on the sign is 165N with the angle between the sign and the rod being 50 degrees. Ignoring the weight of the rod what is

4. ### Physics

The Ultimate strength of a round steel rod is 630.000MPa. If a factor of safety of 5.000 is required, what is the maximum permissible load for the rod if it has a diameter of 3.000cm? ANS = kN (Round to 3 decimal places) Safety =