Sample Asaro water has pH of 7, conductivity of 13.15 , TDO is 20 mg/L , temperature of 21.8,TDS is 23.9 mg/L and TSS is less than 1 gram, and for the standard parameters from WHO are, pH of 8.1 , conductivity 2005, calcium 12.9mg/L, total hardness is 30, total alkalinity 1102, chloride 55 mg/ L, fluoride 7.9 mg/L, sulphate 39 mg/L, TDS 1451Mg /L,arsenic 15 mg /L, and TSS less than 1 mg/L. In more details how quality the water is by comparing the properties of Asaro water collected by students to standards properties taken from WHO and determine the qualitiness of water

Based on the comparison of the properties of Asaro water collected by students to the standard parameters from WHO, we can determine the quality of the water.

1. pH: Asaro water has a pH of 7, while the WHO standard is 8.1. This indicates that the pH of Asaro water is slightly lower than the WHO standard, but still within an acceptable range for drinking water.

2. Conductivity: Asaro water has a conductivity of 13.15, while the WHO standard is 2005. The conductivity of Asaro water is significantly lower than the WHO standard, which may indicate a lower level of dissolved minerals and salts in the water.

3. TDS: Asaro water has a TDS of 23.9 mg/L, while the WHO standard is 1451 mg/L. The TDS of Asaro water is much lower than the WHO standard, which may indicate lower levels of dissolved solids in the water.

4. Other parameters: The levels of calcium, total hardness, total alkalinity, chloride, fluoride, sulphate, and arsenic in Asaro water are not provided for comparison with the WHO standards.

Overall, based on the available information, it appears that Asaro water collected by students meets the WHO standards for pH and TDS, but has significantly lower conductivity levels. However, without data on other important parameters such as calcium, total alkalinity, and fluoride, it is difficult to make a comprehensive assessment of the water quality. Further testing and analysis would be needed to fully evaluate the quality of Asaro water.