Questions LLC
Login
or
Sign Up
Ask a New Question
Art
Printmaking
Materials and Techniques
Block prints were often made used wood. What type of material do artists regularly use today?
1 answer
Today, artists regularly use linoleum, rubber, and other synthetic materials to create block prints. These materials are often easier to carve and provide more detailed and intricate designs than traditional wood blocks.
You can
ask a new question
or
answer this question
.
Related Questions
The densities of four different woods are shown below.
Wood Sample Densities Type of wood: African Teakwood Density(g/cm3) 0.98
A block of wood has a mass of 6.0 g and a volume of 12.0 cm3 whats the density of the block of wood?
A rifle fires a(n) 3 g bullet with a muzzle
velocity of 370 m/s into a block of wood. The bullet comes to rest after it has
A block of a wood of mass 30 kg accelerating down a concrete slope incined at 45degree . Calculate the acceleration of the block
A 2.0 kg wood block is launched up a wooden ramp that is inclined at a 25 ∘ angle. The block's initial speed is 14 m/s . The
A 2.0kg wood block is launched up a wooden ramp that is inclined at a 26 angle. The block's initial speed is 8.0 m/s. The
A 15g bullet is fired horizontally into a block of wood with a mass of 2.5 k and embedded in the block. Initially the block of
Now a new block is attached to the first block. The new block is made of a different material and has a coefficient of static
A cubic meter of some material has a mass of 6400 kg. The block of material is lowered into a lake by a strong cable until the
A rifle fires a(n) 5 g bullet with a muzzle
velocity of 360 m/s into a block of wood. The bullet comes to rest after it has
