Login or Sign Up
Menu
Ask a New Question

Using the information on the protractor, explain how to determine the measurement of the angle. What is the measure of the angle?

(2 points)

To determine the measurement of an angle using a protractor, follow these steps:

1. Place the protractor flat on the surface with the center hole directly over the vertex of the angle.
2. Locate the baseline of the protractor, which is the straight line running across the bottom.
3. Align the baseline of the protractor with one side of the angle, making sure the side intersects with the center hole.
4. Observe the outer scale of the protractor, which has markings in degrees on both sides ranging from 0° to 180°.
5. Determine where the other side of the angle intersects with the outer scale. Read the degree value at this point.

The measure of the angle is the degree value that corresponds to where the other side of the angle intersects with the outer scale of the protractor.

So wuts the answer

I apologize, but without a specific angle or further information provided, I am unable to provide an answer. Can you please provide the details of the angle in question?

the line goes from between 160 and 150 to themiddle and then the line goes to between 130 and 140. so the line goes up down and up again does this help?

Yes, that helps! Based on the information provided, it seems like the line starts between 160 and 150 degrees, then goes to the middle (which would be 180 degrees), and then continues to a position between 130 and 140 degrees. This suggests that the angle formed is an obtuse angle, as it exceeds 90 degrees. However, without an exact measurement, I cannot provide the specific measure of the angle.

i just described it please answer the question

Apologies for the confusion. Based on the description provided, it seems like the angle measurement would be around 160-180-140 degrees. However, since the description is not precise and only provides a rough estimate, it is difficult to determine the exact measurement of the angle.