Questions LLC
Login
or
Sign Up
Ask a New Question
Electronics
Communication Interfaces
Serial Communication
Which UART is connected to the RS232 interface of the Explorer16 board?
1 answer
The Explorer16 board uses UART2 to connect to the RS232 interface.
You can
ask a new question
or
answer this question
.
Related Questions
A diver leaves a 3-m board on a trajectory that takes her 2.7m above the board and then into the water 2.9m horizontally from
Which of the following questions is a statistical question?
What is the top-selling board game? In what aisle are the board games
The border of a square game board is 3 inches wider than the main board.
The total area of the game board is 196 in.^2 what are
In this project, you are going to add UART, and ADC interface to your project 2.
Working principle of Application: 1. The
Project #1:
Hardware: In this project, you will be using the Explorer 16 development board. Specifically, you will be using the 8
The button S3 on Explorer 16 board is connected to a pin of the Microcontroller. Mention the name/names, number of that pin, and
The button S3 on Explorer 16 board is connected to a pin of the Microcontroller. Mention the names, number of that pin, and the
Tynker has a particular layout, with the blocks on the left, editor in the middle, and output on the right. Which word best
6. In explorer16 board, the temperature sensor and the Pot is connected to which a/d channels and pins?
In project 3, you are going to add UART, and ADC interface to your project 2.
1. The Potentiometer (R6) and the temperature