If you have to carry out hot work close to a smoke detector in the engine room, what precautions should be taken?
Notify Master, Deck officer and Engineer in charge.The loop for this special sensor to be switched off and take normal precautions for hot work.
Notify deck officer in charge that a fire alarm may occur.
No special precautions except for having a watch man and a fire extinguisher available.
Disconnect the smoke detector.
I don't know
The correct answer would be: Notify Master, Deck officer, and Engineer in charge. The loop for this special sensor to be switched off and take normal precautions for hot work.
It is important to inform the relevant authorities about the hot work being carried out near a smoke detector in the engine room. This allows them to take necessary precautions and possibly switch off the specific sensor to prevent false alarms. Additionally, standard safety measures for hot work should be followed, such as having a watchman and fire extinguisher available. Disconnecting the smoke detector is not recommended as it compromises the overall safety of the area.
If you have to carry out hot work close to a smoke detector in the engine room, the following precautions should be taken:
1. Notify the Master, Deck officer, and Engineer in charge: Inform the relevant personnel about the hot work being carried out to ensure everyone is aware of the situation.
2. Switch off the special sensor loop: Request the relevant personnel to switch off the sensor loop connected to the smoke detector. This will prevent any false alarms or disruptions during the hot work.
3. Take normal precautions for hot work: Follow standard procedures and safety measures for carrying out hot work, such as using appropriate protective equipment, ensuring proper ventilation, and implementing fire prevention measures.
4. Notify the deck officer in charge: Inform the officer in charge about the possibility of a fire alarm being triggered due to the hot work activities. This will help them stay prepared and take necessary actions if an alarm is activated.
5. Maintain a watchman and keep a fire extinguisher available: Have a designated watchman stationed nearby to immediately detect and respond to any signs of fire or smoke. Additionally, ensure that a suitable fire extinguisher is readily accessible in case of an emergency.
It is important to note that disconnecting the smoke detector should not be done as it compromises safety and increases the risk of fire going undetected.
To determine the correct answer to this question, we need to consider the safety precautions when carrying out hot work close to a smoke detector in an engine room.
The correct answer in this scenario would be to notify the Master, Deck officer, and Engineer in charge, and request for the special sensor loop connected to the smoke detector to be switched off. This is an important step to prevent any false alarms or unnecessary evacuation due to the smoke detector being triggered by the hot work. Additionally, it is essential to take normal precautions for hot work, such as ensuring the presence of a watchman and having a fire extinguisher readily available. Disconnecting the smoke detector entirely is not a recommended approach as it compromises the overall fire safety system and may lead to a higher risk of fire going undetected. Therefore, the recommended precautions are to notify relevant personnel, switch off special sensor loops, and maintain normal hot work safety measures.