how thick would it be if you used 5 2x6’s construction
The thickness of the construction using 5 2x6's will depend on how the boards are arranged.
If the 2x6's are stacked on top of one another, the total thickness would be equal to the combined thickness of the individual boards. The actual measurement of a 2x6 board is 1.5 inches by 5.5 inches. So, 5 boards stacked on top of each other would result in a total thickness of 7.5 inches (1.5 inches x 5 boards).
On the other hand, if the 2x6's are laid side by side, the total thickness would remain the same as the thickness of an individual board. In this case, the construction would be approximately 1.5 inches thick.
Note that these measurements may vary slightly due to the actual dimensions of the boards used, as well as any additional factors such as sanding or planing that may affect the thickness.
To determine the thickness by using 5 pieces of 2x6 construction lumber, we need to know the actual dimensions of a 2x6.
Typically, a 2x6 board has a nominal size of 2 inches by 6 inches, but its actual dimensions are slightly smaller due to the milling process. The actual size of a 2x6 board is usually around 1.5 inches by 5.5 inches.
Assuming the actual measurements, the combined thickness of five 2x6 boards will be:
5 boards x 1.5 inches = 7.5 inches
Therefore, using five 2x6 lumber pieces, the total thickness would be about 7.5 inches.
To determine the thickness when using five 2x6's in construction, we first need to understand the dimensions of a standard 2x6 board.
In construction, the term "2x6" does not refer to the actual dimensions of the lumber. Instead, it is a specific size description based on its rough dimensions before it is planed and commonly referred to by its nominal size. A standard 2x6 board actually measures 1.5 inches in thickness (height) and 5.5 inches in width.
Now, if you stack five 2x6 boards together, the total thickness would depend on how you arrange them.
If you stack them side by side, with their widths aligned horizontally, the combined width would be the total width of all five boards, which would be 5.5 inches.
On the other hand, if you stack them on top of each other, with their thicknesses aligned vertically, the total thickness would be the sum of all five individual board thicknesses. Since each 2x6 board has a thickness of 1.5 inches, the total thickness would be 1.5 inches multiplied by five, which equals 7.5 inches.
Therefore, if you arrange five 2x6 boards side by side, the thickness would be 5.5 inches. If you stack them on top of each other, the thickness would be 7.5 inches.