In 1878, a township was surveyed in Muskoka. The returns of survey included the surveyor’s
drawing of the Township Plan, a small portion of which appears at Figure 1. Separate patents
were given for Lots 12 and 13, Concession III, and Lot 12, Concession IV, in 1880, 1881 and 1882
respectively, and all subsequent dealings with title were under the Land Titles Act.
In 1968, a surveyor was asked to prepare a survey for the owner at that time of Lot 13,
Concession III. Part of that survey appears at Figure 2.
Today, you are the surveyor who is asked to survey the West Half of Lot 13, Concession III. In
doing so, you are told that the owner of Lot 13, Concession III, was able to get a severance
approved, but that application for severance was not based on any survey work. When your
field crew returns from the initial survey of the site and the data is do
ne, you will need to calculate the boundaries of the West Half of Lot 13, Concession III based on the information provided.
To calculate the boundaries of the West Half of Lot 13, Concession III, you will need to refer to both the original survey and the survey conducted in 1968.
1. Start by referring to the original survey from 1878, represented in Figure 1. Identify the location of Lot 13, Concession III within the Township Plan. Take note of any relevant landmarks or features mentioned in the surveyor's notes.
2. Use the information from the original survey to locate Lot 13, Concession III on the survey conducted in 1968, represented in Figure 2. Compare the boundaries and features shown in the 1968 survey to those in the original survey. Take note of any changes or discrepancies.
3. Based on the information provided, make any necessary adjustments or corrections to the boundaries of Lot 13, Concession III. Use any available landmarks or features from both surveys to help guide your calculations.
4. Once you have determined the boundaries of Lot 13, Concession III in the 1968 survey, divide it in half to find the West Half. This can typically be done by drawing a line vertically through the middle of the lot.
5. Finally, use the measurements obtained from the 1968 survey to mark and define the boundaries of the West Half of Lot 13, Concession III in the field. Make sure to clearly mark any monuments or reference points used.
Note: It is important to consult any relevant legal documents, land titles, or surveys that may provide additional information or requirements for the survey. Always follow proper surveying procedures and guidelines to ensure accuracy and compliance.
cumented, you can begin the process of surveying the West Half of Lot 13, Concession III. Here is a step-by-step guide on how to proceed:
Step 1: Obtain the original survey records
Retrieve the original survey records from 1968, which include Figure 2. These records will serve as a reference for the previous survey work conducted on Lot 13, Concession III.
Step 2: Review the original survey records
Carefully analyze the survey records to understand the previous surveyor's methodology, measurements, and any relevant notes or observations. This will provide you with a starting point for your survey.
Step 3: Conduct a field survey
Based on the information gathered from the previous survey records, you will need to conduct a field survey to accurately establish the boundaries of the West Half of Lot 13, Concession III. Assign a field crew to physically measure and record data related to the boundaries and characteristics of the land.
Step 4: Use surveying instruments and techniques
Equip your field crew with appropriate surveying instruments, such as total stations, GPS receivers, and measuring tapes. Ensure they are trained in using these instruments and follow proper surveying techniques, such as measuring angles, distances, and elevations accurately.
Step 5: Verify and cross-reference survey data
As your field crew gathers data on the boundaries and features of the West Half of Lot 13, Concession III, verify the measurements and notes multiple times to ensure accuracy. Cross-reference the data with the original survey records and any other available historical documents to identify any discrepancies or changes that might have occurred over time.
Step 6: Prepare a survey plan
Once the field survey is complete and all data has been verified, prepare a survey plan depicting the boundaries and key features of the West Half of Lot 13, Concession III. This plan should include accurate measurements, bearings, landmarks, and any other relevant information. Follow the standards and regulations set forth by the Land Titles Act.
Step 7: Present the survey plan for approval
Submit the completed survey plan to the appropriate authorities for review and approval, following the guidelines outlined in the Land Titles Act. This will ensure that the survey is legally recognized and can be used for future purposes, such as property transactions or development projects.
Step 8: Communicate the results to the client
After the survey plan is approved, communicate the results to the client who requested the survey. Provide them with a copy of the survey plan and any other relevant documentation that supports the accuracy and validity of the survey.
Note: Throughout the entire process, it is essential to adhere to professional surveying practices, maintain accurate records, and comply with local laws and regulations governing survey work.
To survey the West Half of Lot 13, Concession III, we need to gather the necessary information and follow these steps:
1. Start by examining the historical documents mentioned in the question, such as the Township Plan from 1878 and the separate patents issued in 1880, 1881, and 1882. These documents will provide information about the original survey and subsequent legal transactions.
2. Review the surveyor's drawing of the Township Plan from 1878, specifically focusing on the portion depicting the relevant Lots 12 and 13, Concession III. This will give you an understanding of the original boundaries and layout of the lots in the township.
3. Study the survey prepared by the previous surveyor in 1968, which includes the portion of Lot 13, Concession III you need to survey. This survey will provide valuable information about the lot's existing boundaries and features.
4. Consult with the owner of Lot 13, Concession III, who obtained an approved severance without a survey. Discuss their intentions and any specific requirements they have for the western half of the lot.
5. Organize a field crew to conduct a physical survey of the site. Make sure the crew is equipped with the necessary tools, such as surveying instruments, measuring tapes, and markers.
6. During the field survey, collect data on existing features, landmarks, and boundaries of the western half of Lot 13, Concession III. This data will help create an accurate representation of the lot's boundaries and any other relevant spatial information.
7. Process the collected data using appropriate surveying techniques and software. This will involve analyzing measurements, reconciling any discrepancies, and creating a precise survey plan for the West Half of Lot 13, Concession III.
8. Double-check the survey plan to ensure accuracy and compliance with relevant laws and regulations.
9. As the surveyor, you may need to prepare official documentation, such as a survey report or legal description of the surveyed area. These documents should accurately describe the boundaries, dimensions, and any other details of the West Half of Lot 13, Concession III.
Remember, the process of surveying can be complex, and it's important to stay up-to-date with local laws and regulations governing land surveys. Additionally, consult with relevant authorities, such as land title offices or local planning departments, to ensure compliance and accuracy in the survey process.