Gather data: Fill in the first line of the data table below.
Then, use the same procedure to test the effect of each of the following factors. Click Reset between each trial. Record the initial and final body temperatures in the table below. (Leave the last column blank.)
Set the Exercise level to 70%. (All other settings in default position.)
Click Reset. Set the Sweat level to 70%. (All other settings in default position.)
Click Reset. Below Body position, click Shivering. (Other settings in default mode.)
Factor
Initial body temp.
Body temp. after one hour
Effect of factor on body temperature
Standing still
Exercising
Sweating
Shivering
Factor: Standing still
Initial body temp.
Body temp. after one hour
Effect of factor on body temperature
Standing still
Exercising
Sweating
Shivering
Factor Initial body temp. Body temp. after one hour Effect of factor on body temperature
Standing still
Exercising
Sweating
Shivering
To gather data and fill in the first line of the data table, follow these steps:
1. Set all other settings to their default positions.
2. Click on the "Reset" button to start with the initial conditions.
3. Set the exercise level to 70%.
4. Monitor the initial body temperature.
5. After one hour, record the body temperature in the "Body temp. after one hour" column.
6. Leave the "Effect of factor on body temperature" column blank for now.
To test the effect of each of the following factors, repeat the same procedure outlined above, but with different settings for each factor:
1. Standing still: Keep all settings in default mode, except for selecting the "Standing still" option under Body position. Follow the same steps as before to record the initial and final body temperatures.
2. Exercising: Set the exercise level to 70% and keep all other settings in default mode. Follow the same steps to record the initial and final body temperatures.
3. Sweating: Click on the "Reset" button to start with the initial conditions. Set the sweat level to 70% and keep all other settings in default mode. Follow the same steps to record the initial and final body temperatures.
4. Shivering: Click on the "Reset" button to start with the initial conditions. Keep all other settings in default mode, except for selecting the "Shivering" option under Body position. Follow the same steps to record the initial and final body temperatures.
Fill in the gathered data in the corresponding columns of the table.