Questions LLC
Login
or
Sign Up
Ask a New Question
Math
Measurement
How to measure depth of suction catheter?
1 answer
The depth of a suction catheter can be measured using a ruler or caliper. The ruler or caliper should be placed at the end of the catheter and the measurement should be taken from the end of the catheter to the tip of the suction port.
You can
ask a new question
or
answer this question
.
Related Questions
you are designing a diving bell to withstand the pressure of sea water at a depth of 250m. a)what is the quage pressure at the
A snorkeler takes a syringe filled with 16 mL of air from the surface, where the pressure is 1.0 ATM, to an unknown depth. The
The depth d of water in a tank oscillates sinusoidally once every
4 hours. If the smallest depth is 7.9 feet and the largest
A group of students decided to study the sinusoidal nature of tides. Values for the depth of the water level were recorded at
Help! I am not really good with story problems!
Forest rangers measure a depth of 82" of snow on a mountain peak at 8am. Snow is
On a typical day at an ocean port, the water has a maximum depth of 20m at 8:00AM. The minimum depth of 8m occurs 6.2h later.
The average depth of the water in a port on a tidal river is 4 m. At low tide, the depth of the water is 2 m. One cycle is
The average depth of the water in a port on a tidal river is 4m. At low tide, the depth of the water is 2m. One cycle is
A new set of car tires has a tread depth of 8 millileters. The tread depth decreases 0.12 millimeter per thousand miles driven.
The depth of the first model of a mobile phone measure 7/20 of an inch. The second model is 6/7 Was the depth of the first