How are gooseneck flatbed trailers measured?
Gooseneck flatbed trailers are typically measured by their overall length, width, and height. The length is measured from the front of the trailer to the back, the width is measured from the outside of the tires, and the height is measured from the ground to the top of the trailer.
Gooseneck flatbed trailers are typically measured using two primary dimensions: overall length and deck length. Here's an explanation of how each measurement is determined:
1. Overall Length: This refers to the total length of the trailer, including both the bed and the gooseneck (or neck), which is the connecting part between the trailer and the towing vehicle. To measure the overall length, start from the front of the gooseneck and extend it to the rear end of the trailer. This measurement is often expressed in feet or sometimes in inches.
2. Deck Length: The deck length specifically refers to the usable space on the trailer bed. It does not include the gooseneck. To measure the deck length, start from the front end of the bed, excluding the gooseneck section, and measure up to the rear end of the bed. This measurement is also commonly expressed in feet.
In addition to these primary measurements, gooseneck flatbed trailers may have other specifications such as deck width, height, payload capacity, and weight rating that can also be important when considering the suitability of the trailer for specific purposes.
Gooseneck flatbed trailers are typically measured by their overall length, width, and deck length. Here are the steps to measure a gooseneck flatbed trailer:
1. Measure the overall length: Begin by measuring the trailer from the hitch or the front of the gooseneck to the rear end of the trailer. This will give you the overall length of the trailer.
2. Measure the width: Measure the width of the trailer from one side to the other. This will give you the overall width of the trailer.
3. Measure the deck length: The deck length refers to the usable space on the trailer where you can load cargo. It does not include the gooseneck portion. Measure the length of the deck from the rear end of the trailer to the point where the gooseneck portion begins.
Keep in mind that these measurements can vary depending on the specific design and manufacturer of the gooseneck flatbed trailer.