The objective of this question is to show your thought process and communication skills when explaining a process to an end-user who is completely unfamiliar with the basic concepts and processes required to perform a task.
You are given:
1. four pieces of wood; each piece is 10 cm long, 10 cm wide, and 2 cm thick
2. two pieces of wood; each piece is 12 cm long, 12 cm wide, and 2 cm thick
3. An 8 oz bottle of wood glue
Provide instructions to assemble a cube from these components. The cube must survive a drop from a height of 10 cm and remain intact
please help is urgent
Whats the ans?
To assemble a cube using the given components and ensure it remains intact when dropped from a height of 10 cm, follow these step-by-step instructions:
1. Start by selecting one of the 10 cm x 10 cm x 2 cm pieces of wood as the base of the cube.
2. Take two of the 10 cm x 10 cm x 2 cm pieces of wood and apply a thin layer of wood glue on one of the 10 cm sides of each piece.
3. Attach the two glued pieces vertically to two adjacent sides of the base piece. Make sure the glued sides are facing inwards towards the center of the cube. The ends of the two attached pieces should touch each other at the top.
4. Apply wood glue to the other two adjacent 10 cm sides of the two attached pieces, and also apply it to the unglued side of the fourth 10 cm x 10 cm x 2 cm piece.
5. Place the unglued side of the fourth piece against the glued sides of the two attached pieces, forming a 90-degree angle with the base. Press firmly to ensure the pieces are securely joined together.
6. Allow the glued pieces to dry for the recommended time mentioned on the wood glue bottle. This will ensure a strong bond.
7. Once the glued joints have dried completely, take one of the 12 cm x 12 cm x 2 cm pieces of wood and repeat steps 2-5, attaching it to the open top of the cube.
8. Apply wood glue to the remaining 12 cm side of the attached 12 cm x 12 cm x 2 cm piece and the unglued side of the other 12 cm x 12 cm x 2 cm piece.
9. Position the unglued side of the second 12 cm x 12 cm x 2 cm piece against the glued side of the attached piece, forming a 90-degree angle with the cube. Press firmly to secure the joint.
10. Leave the glued joints to dry completely according to the manufacturer's instructions on the wood glue bottle.
Congratulations! You have successfully assembled a cube using the given pieces of wood. The cube should now be able to withstand a drop from a height of 10 cm without breaking or coming apart.
To assemble a cube using the given wood pieces and wood glue, follow these steps:
1. Start by selecting four pieces of wood that are each 10 cm long, 10 cm wide, and 2 cm thick. These will be used for the sides of the cube.
2. Take the first piece of wood and apply wood glue along one of its edges. Then, join it to the second piece of wood by pressing the glued edge of the first piece against one of the edges of the second piece. Hold them together firmly for a few minutes to allow the glue to set.
3. Repeat step 2 to attach the third and fourth pieces of wood to the previously joined pieces, forming the sides of the cube. Remember to apply wood glue to the edges before joining them together.
4. Now, take the two pieces of wood that are each 12 cm long, 12 cm wide, and 2 cm thick. These will be used for the top and bottom of the cube.
5. Apply wood glue to one of the edges of the first 12 cm piece and attach it to one of the remaining open edges of the side pieces. Hold it firmly in place for a few minutes to allow the glue to set.
6. Repeat step 5 to attach the second 12 cm piece to the remaining edge, completing the cube structure.
7. Once all the pieces have been assembled, double-check the corners and edges to ensure they are aligned and securely held together by the wood glue.
8. Allow the wood glue to fully cure and dry according to the instructions on the bottle. This usually takes around 24 hours.
9. After the glue has dried, your cube is now ready. Test its durability by dropping it from a height of 10 cm. If it remains intact and in the shape of a cube, then you have successfully assembled a cube using the given components.
Remember to always prioritize safety when handling tools and materials.