Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
To turn a nut, a wrench must create 2.25 N*m of torque. if the person exerts a 48.3 N force perpendicular to the wrench, how dar from the nut should the force be applied?
1 answer
look at the units.
N * m = N-m
48.3N * d = 2.25 N-m
You can
ask a new question
or
answer this question
.
Related Questions
Using a wrench 0.4 m long, a force of at least 100 N is needed to turn a
nut. (a) How large a torque is required? (b) How large a
150 N of force is applied perpendicular to a 15 cm wrench. Calculate the torque generated.
A.2250 N*m B. 31.3 N*m C. 18.7N*m D.
3. A person exerts a force of 55 N on the end of a door 74 cm wide. What is the magnitude of the torque if the force is exerted
A wrench .9m long lies along the positive y-axis, and grips a bolt at the origin. A force is applied in the direction of (0,1,3)
A force of 32 N is applied at the end of a wrench handle that is 27 cm long. The force is applied in a direction perpendicular
a wrench is rotated with torque of magnitude 175 N (M). the force is applied 45 cm from the pivot point at an angle of 48
To tighten a bolt, you push with a force of 72 N at the end of a wrench handle that is 0.26 m from the axis of the bolt.What
If the torque required to loosen a nut that
is holding a flat tire in place on a car has a magnitude of 31 N ยท m, what minimum
A person exerts a horizontal force of 36 N on the end of a door 97cm wide. What is the magnitude of the torque if the force is
A force of 50N acts on the end of a wrench 18 cm long.
a) In what direction should the force act to produce the maximum torque?
