Questions LLC
Login
or
Sign Up
Ask a New Question
Electronics
Microcontrollers
PIC 16F877a
If the frequency of an RC oscillator connected to CLKIN is 96 KHz on A PIC 16F877a, the frequency on CLKOUT would be?
1 answer
In RC mode, OSC2 pin outputs CLKO, which has 1/4 the frequency of OSC1/clckin and denotes the instruction cycle rate.
You can
ask a new question
or
answer this question
.
Related Questions
Q11
a(ii)A sinusoidal carrier wave has frequency 500 kHz and amplitude 6.0 V. It is to be frequency modulated by a sinusoidal
1. A whistle you use to call your hunting dog has a frequency of 21 kHz, but your dog is ignoring it. You suspect the whistle
A cardiologist uses an ultrasound scanner with an operating frequency of 3.5 MHz that can detect Doppler frequency shifts as
The frequency of a radio wave is inversely proportional to the wavelength. If a wave 250 m long has a frequency of about 1200
c. The primary oscillator on explorer 16 is connected between two pins of the Microcontroller. Mention the name/names and the
A bat flying at 5.5 m/s emits a chirp at 35 kHz. If this sound pulse is reflected by a wall, what is the frequency of the echo
The primary oscillator frequency on explorer 16 is 14.535 MHZ. PLL is used. What is the instruction cycle frequency (Fcy)?
Fosc
If the frequency of the crystal oscillator is 20 MHz on a PIC16F877a, the frequency of the signal on OSC1/CLKIN would be?
An oscillator consists of a block of mass 512.50g connected to a spring. When set into
oscillation with amplitude 38.00cm, the
i need help with this one!
A 100KHz oscillator that's followed by a doubler and two triplers will produce an output of