Respond to this Question
Similar Questions
-
physics
Consider two copper wires with the same cross-sectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare? CHECK ALL THAT APPLY Wire A and wire B have the same resistance.
asked by Anonymous on February 7, 2014 -
Physics
A copper wire of diameter 0.30mm and length 1.50m is joined to another steel wire of same diameter and length 1.20m. The copper part of the double wire is hung vertically to a fixed point, while a small weight is connected to the
asked by Cali on October 31, 2013 -
College Physics II
A steel wire and a copper wire, each of diameter 2.000 mm, are joined end to end. At 48.0°C, each has an unstretched length of 2.000 m. The wires are connected between two fixed supports 4.000 m apart on a tabletop. The steel
asked by Andrew on September 3, 2013 -
Physics
Two cylindrical copper wires have the same mass and are at the same temperature. Wire A is twice as long as wire B. The resistance of wire A is related to that of wire B by a) RA = RB/4 b) RA = RB/2 c) RA = RB d) RA = 2RB e) RA =
asked by Anonymous on September 24, 2014 -
Physics
Two cylindrical copper wires have the same mass and are at the same temperature. Wire A is twice as long as wire B. The resistance of wire A is related to that of wire B by : a) RA = RB/4 b) RA = RB/2 c) RA = RB d) RA = 2RB e) RA
asked by Anonymous on September 24, 2014 -
Physics
Two straight and parallel wires of length 1.0 m carry a current - the first carries a currecnt of 9.0 A while the other wire carries a current of 4.0 A. What distance must separate the two straight and parallel copper wires if the
asked by Jim on December 8, 2010 -
Physics
Three conducting straight wires (though insulated from each other) are each 2 m long. They are electrically connected to each other only at their ends points A and B. AB = 2 meter. The wires are cylindrical. One is made of copper,
asked by P on March 13, 2013 -
Physics ||
Q.1. Two wires each of length 40 m and diameter 2.6 mm, are connected in series. A potential difference of 50 V is applied between the ends of the composite wire. The resistances the wires are 0.13 Ω and 0.75 Ω, respectively.
asked by Meemee.meme on June 4, 2014 -
Physics
The density of copper is 9.8×10^3 and the density of gold is1.9×10^4. When the two wires of these two metals are held under the same tension the speed in the gold wire is found to be half of that of the copper. What is the ratio
asked by Frank on October 7, 2016 -
Chemistry
When a pair of copper wires are connected to the (+) and (–) terminals of a 9–V battery and immersed in a solution containing I- ions, one of the wires becomes coated with I2. Besides simply wiping off the wire, how else could
asked by Anonymous on October 23, 2013