Post a New Question

mechanics

posted by .

Find the total kinetic energy of a 1500 g wheel, 700 mm in diameter, rolling across a level surface at 650 rpm. Assume that the wheel can be considered as a hoop.

(b) For the wheel in part (a), calculate the torque required to decrease its rotational speed from 400 rpm to rest in 9 s.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A grinding wheel in the shape of a solid disk is 0.200 m in diameter and has a mass of 3.00 kg. The wheel is rotating at 2200 rpm about an axis through its center. (a) what is its kinetic energy?
  2. Physics

    (b) Given that Icm = ½MR2 for a uniform solid wheel, (i) show that the rotational kinetic energy is half the translational kinetic energy for such a wheel. (ii) For the wheel of diameter 10 cm, find its final speed after traversing …
  3. Trig

    A ferris wheel has a 14 meter diameter and turns counterclockwise at 6 rpm. a) Assuming that the center of the wheel is the origin of an x-y coordinate plane, write functions to find the position (x,y) of a rider that starts at the …
  4. Physics

    A wheel is rolling ithout slipping at 487 meters per second to the right on a level surface. the diameter of the wheel is 100 centimeters. What is the angular speed of the wheel in revolutions per minute?
  5. trigonometry

    The sprockets and chain of a bicycle are shown in the figure. The pedal sprocket has a radius of 4 in., the wheel sprocket a radius of 2 in., and the wheel a radius of 13 in. The cyclist pedals at 45 rpm. (a) Find the angular speed …
  6. Math

    The rim of the London Eye (a 135m diameter ferris wheel) moves 26 cm/sec, slow enough for passengers to safely get on the wheel from the platform (2 meters above ground level) without stopping the wheel at the bottom of its rotation. …
  7. Mechanics

    A constant force of 40newton is applied tangentally to the rim of the wheel with 20cetimetre radius the wheel hs moment of intial 30kg find (a)angular acceleration (b)angular speed after 4second frm rest (c)d number of revolution made …
  8. mechanics

    A constant force of 40N is applied tangentally to the rim of a wheel with 20cm radius. The wheel has a moment of inertia 30kg.m2. Find (a)angular acceleration (b)angular speed after 4seconds from rest (c)the number of revolutions made …
  9. Physics

    Now your bicycle wheel is rotating with an angular speed of 43.8 rad/s. The wheel has a mass of 4.9 kg and a radius of 48.6 cm. Treat the wheel as a solid thin disc. (a) Calculate the rotational kinetic energy of the wheel in J. (b) …
  10. Trigonometry

    A point on the rim of a wheel of unknown radius in a pulley system has a velocity of 16 in/min. The wheel is making 4 rpm. If the radius of the other wheel is 8 inches, find the 8" wheel's rpms and the unknown wheel's radius. I got …

More Similar Questions

Post a New Question