# physics

posted by .

A heavy concrete panel is being lifted into position in a building by means of a crane . The tension of 2.17 104 N in the supporting cable produces a torque with respect to point O. (Let L = 42.0 m.)

• physics -

Is there a question here?

## Similar Questions

1. ### physics, torque

A crane shown in the drawing is lifting a 170-kg crate upward with an acceleration of 1.8 m/s2. The cable from the crate passes over a solid cylindrical pulley at the top of the boom. The pulley has a mass of 130 kg. The cable is then …
2. ### Physics

An 1567 kg car, being lifted at a steady speed by a crane, hangs at the end of a cable whos radius is .0084. The cable is 5m in length and stretches by .0081 becuase of the weight of the car. What is young's modulus for the cable?
3. ### physics

A 25 ft long crane supported at its lower end by a pin is elevated by a horizontal cable. A 250 lb load is suspended from the outer end of the crane. The center of gravity of the crane is 10 ft from the pin and the crane weighs 200 …
4. ### Physics

A 1,500 kg crate hangs motionless from a crane cable. What is the tension in the cable?
5. ### PHYSICS

A heavy concrete panel is being lifted into position in a building by means of a crane (see figure below). The tension of 1.89 104 N in the supporting cable produces a torque with respect to point O. (Let L = 39.3 m.) (b) Find the …
6. ### Physics

A heavy concrete panel is being lifted into position in a building by means of a crane (see figure below). The tension of 2.52 104 N in the supporting cable produces a torque with respect to point O. (Let L = 41.0 m.) (a) Does this …
7. ### physics

A heavy piece of equipment(85kg) is being moved by elevator between floors in a building. Two identical small cranes are used. A cable connecting each crane to a mounting hook on the top of the piece of equipment.The cable from one …
8. ### Physics

A crane with a movable pulley system on a horizontal arm is moving a large container. The 355 kg container is hanging from a cable that is 6.15 m out on the 7.50 m arm. The arm has a mass of 345 kg. A cable that is attached to its …
9. ### Physics

You have a crane boom with a mass of 10000kg being held up by a cable and holding a weight of 2500kg. 1. Find the torque caused by the weight 2. Find the torque caused by the cable 3. Find the torque caused by any other force holding …
10. ### Physics

You have a crane boom with a mass of 10000kg being held up by a cable and holding a weight of 2500kg. A. Find the torque caused by the weight B. Find the torque caused by the cable C. Find the torque caused by any other force holding …

More Similar Questions