math

posted by .

the constant angular acceleration of pulley is 4rad/s2, angular speed 3 rad/s, determine the radius of pulley if the total acceleration of a print on the rim of the pulley is 3.5m/s2

  • Dynamics -

    0.355m

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics, please help me today.

    four pulleys are connected by two belts. Pulley A (radius 15cm) is the drive pulley and it rotates at 10 rad/s. Pulley B (radius 10 cm) is connected by belt 1 to pulley A. Pulley B' (radius 5cm) is concentric with pulley B and is rigidly …
  2. Angular acceleration

    Appreciate if someone can advise on how to calculate the following: A hoist lifts a 3.5kg load from rest, and has a final velocity of 2 m/s after 4 seconds. The motor can develop a torque of 4 Nm. Determine: i) The linear acceleration …
  3. physics

    A pulley rotating in the counterclockwise direction is attached to a mass suspended from a string. The mass causes the pulley's angular velocity to decrease with a constant angular acceleration α = -2.2 rad/s2. If the pulley's …
  4. physics

    A 15.0 kg mass and a 10.0 kg mass are suspended by a pulley that has a radius of 10.0 cm and a mass of 3.0 kg. The cord has negligible mass and causes the pulley to rotate without slipping. The puller is frictionless and may be treated …
  5. physics

    starting from rest s=0,pulley A (rA=50 mm)is given a constant angular acceleration, A=6 rad/s2. Pulley C(rC=150mm) has an inner hub D (rD=75 mm) which is fixed to C and turns with it. What is the speed of block B when it has risen …
  6. Physics please help! check if its correct

    A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner diameter of the pulley is 60.0 cm, while the outer diameter is 1.00 m. The system is released from rest, …
  7. dynamics

    13. The constant angular acceleration of a pulley is 4 rad/s2 and its angular speed its 3 rad/s. Determine the radius of the pulley if the total acceleration of a print on the rim of the pulley is 3.5m/s2.
  8. Physic

    A block (mass 2.4 kg) is hanging from a massless cord that is wrapped around a pulley -3 2 (moment of inertia of the pulley = 1.3 x 10 kg·m ), as the drawing shows. Initially the pulley is prevented from rotating and the block is …
  9. Physic

    so i need to calculate the moment of inertia of the pulley and the angular acceleration of the pulley. mass A = 9kg Mass B = 15kg Inner pulley= Mass 3kg R= 6cm Outerpulley= mass 7kg R=12cm it is a composite pulley with two masses hanging. …
  10. physics

    Consider the system shown in the diagram. The pulley is a uniform cylinder with mass m3 = 0.60 kg and radius R = 4.0 cm, the other two masses are m1 = 2.5 kg and m2 = 1.0 kg, and á = 30o. Assume the rope is massless, there is no slipping …

More Similar Questions