Maths

posted by .

Calculate the number of litres of water delivered per minute by a pipe with cross-sectional area 15 square centimetres, if the water passes through the pipe at an average speed of 30cm/s (second)
P.S. Working out please

  • Maths -

    think about it.
    each second, a 30cm tall cylinder of water passes through the pipe

    v = base * height

    15cm^2 * 30 cm/s = 450 cm^3/s * 60s/min = 27000 cm^3/min = 27L/min

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial cross-sectional area of the pipe is 6.40×10^−2 m; and at where the water …
  2. phys

    Water flows steadily from an open tank into a pipe as shown in the figure. The elevation of the top of the tank is 12.3 m, and the elevation at the pipe is 3.80 m. The initial cross-sectional area of the pipe (at point 2) is 5.60×10−2 …
  3. Physics

    Water is flowing in a pipe with a varying cross-section area, and at all points the water completely fills the pipe. At point 1 the cross-section area of the pipe is 0.080 m^2, and the magnitude of the fluid velocity is 2.50m/s. Calculate …
  4. physical

    Water flow along horizanta pipe at cross sectional area 48cm which has a constriction at cross sectional area 12cm at one place if the speed at the water at the constriction point is 4m/s calculate the speep at the wide section
  5. phisecs

    water is moving with a speed of 5 m/s through a pip with a cross-sectional area of 4cm^2 . the water gradual descends 10 m as the pipe cross-sectional area increases 8cm^2 . if the pressure at the upper level is 1.5*10^5 , the pressure …
  6. physics

    A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2 = 0.0769 m2. The gas has a density of ρ …
  7. Physics

    Water enters a pipe with a cross sectional area of 3.0 cm^2 with a velocity of 3.0 m/s. The water encounters a constriction where its velocity is 15 m/s. What is the cross sectional area of the constricted portion of the pipe?
  8. physiscs

    A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2 = 0.0779 m2. The gas has a density of ρ …
  9. Math

    The area of cross section of a pipe is 5.4 centimetres square and the water pump out of it at the rate of 27 kilometre per hour find the volume of water which flows out of the pipe in 1 minute
  10. physics

    Water is flowing in a pipe with a circular cross-section area ,and at all point the water completely fills the pipe.At point 1 ,the cross sectiona are of pipe is 0.070 meter square and the fluid velocity is 3.50 meter per second. a.) …

More Similar Questions