Post a New Question

physics

posted by .

A 150L water heater is rated at 8kW. If 20%if its heat escapes, how long does the heater take to raise the temp of 150-L of water from 10 to 60 degrees C

  • physics -

    48 degrees C

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. AP Physics

    You go to kitchen to boil water. You pour 280 gram of water to a container, and put the container on a 293 W electric heater. Assume that all the heat from the heater is used to heat the water. The specific heat of water is 4.19 J/g …
  2. College Physics

    A 1500-W heater is designed to be plugged into a 120-V outlet. What current will flow through the heating coil when the heater is plugged in?
  3. College Physics

    On average, an electric water heater operates for 3.4h each day. If the cost of electricity is $0.3 kWh, what is the cost of operating the heater during a 30-day month?
  4. Physics

    Your whole family has taken showers before you, dropping the temperature in the water heater to 18 degrees Celsius. If the water heater holds 150 kg of water, how much energy will it take to bring it to 50 degrees Celsius?
  5. Chemistry

    A portable electric water heater transfers 255 watts (W) of power to 5.5 L of water, where 1 W = 1 J/s. How much time (in minutes) will it take for the water heater to heat the 5.5 L of water from 25 degrees celsius to 42 degrees celsius?
  6. Physics

    An electric immersion heater is rated 5 A when connected to a 120V circuit. What is the resistance of the heater?
  7. physical science

    A 150-L water heater is rated at 8 kW .If 20 percent of its heat escapes, how long does the heater take to raise the temperature of 150 L of water from 10C to 60C?
  8. Chemistry

    A portable electric water heater transfers 255 watts (W of power to 5.5 L of water, where 1 W=1J/s.How much time (in minutes) will it take for the water heater to heat the 5.5 L of water from 27∘C to 49∘C?
  9. Basic Chemistry

    A 150L water heater is set to a cutoff temperature of 49 degrees C and that the incoming water is at 298K, calculate the energy in kJ needed to get this 150L water to it's maximum temperature. Please help!
  10. Science: Physics

    We use an electric immersion heater to heat 2,0 liters water having temperature of 20C to the boiling point. Specific heat capacity of water is 4,19 kJ/(kg c). The power of the heater is 1,50 kW and efficiency of heating is 80 %. …

More Similar Questions

Post a New Question