Application problems with fractionsþ

posted by .

Cheryl is fitting a turquoise stone into a bear claw pendant. Find the diameter of the hole in the pendant.

(The diameter, which is 7/8 inches, is the distance across the center of the hole. The two areas outside the hole are 3/16 inches in length.)

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Math

    A piece of rectangular metal has 8 holes punched in it that lie in a straight line.If there are 1 1/16 inches between the centers of two consecutive holes find the distance from the center of the first hole to the center of the last …
  2. physics

    A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk. Find …
  3. physics

    A hole in an aluminum plate has a diameter of 1.465 cm at 22.80° C. (a) What is the diameter of the hole at 199.0° C (to four significant digits)?
  4. Chemistry

    A NASA satellite showed that in 2003 the ozone hole was much larger than it was in 2002. The 2003 hole measured 1.04 x in diameter, while the diameter of the 2002 hole was 6.9 x Calculate the difference in size between the two holes …
  5. Physics

    A machine part is made from a uniform solid disk of radius R and mass M. A hole of radius R/2 is drilled into the disk, with the center of the hole at a distance R/2 from the center of the disk (the diameter of the hole spans from …
  6. Physic

    A machine part is made from a uniform solid disk of radius R = 0.161 m and mass M = 7.75 kg. A hole of radius R/2 is drilled into the disk, with the center of the hole at a distance R/2 from the center of the disk (the diameter of …
  7. Physics

    A ball and a thin plate are made from different materials and have the same initial temperature. The ball does not fit through a hole in the plate, because the diameter of the ball is slightly larger than the diameter of the hole. …
  8. math

    At a miniature golf course, the fourth hole involves hitting the ball through a cylindrical tube that falls to a circular green below, as shown in the illustration. The diameter of this green is 76 inches, and the diameter of the hole …
  9. physics

    Problem: A long cylinder of diameter 2a has a charge per unit length, lambda, that is uniformly distributed down a very long wire. The cross section of the cylinder is not uniform, with a small hole drilled into it, which has a center …
  10. physics

    A commonly used method of fastening one part to another part is called "shrink fitting." A steel rod has a diameter of 2.0046 cm, and a flat plate contains a hole whose diameter is 2.0000 cm. The rod is cooled so that it just fits …

More Similar Questions