physics

posted by .

one of the factors that limits the reach of a crane is the moment created by the load, measured with the respect to an axis A at the base of the front support. if the boom shown is 30m long, and at an angle of 25 degrees with the horizontal, determine the moment of the 20000 kg load about an axis

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. PHYSICS

    The boom crane in the diagram is in static equilibrium and weighs 2000 N with its center of gravity in the middle of its length. It is supported by a frictionless pivot at the left end and a cable connected to the center of the boom …
  2. science

    A crane whose motor has a power input of 5.0 kW lifts a 120-kg load of bricks through a height of 30m in 90s. what is the efficiency of the crane, which is the ratio between its output power and its input power.
  3. physics

    A wrecking ball (weight 4140 N) is supported by a boom, which may be assumed to be uniform and has a weight of 2550 N. As the drawing shows, a support cable runs from the top of the boom to the tractor. The angle between the support …
  4. physics

    A crane in a marble quarry is mounted on the rock walls of the quarry and is supporting a 2900kg slab of marble as shown in the figure. The center of mass of the 750kg boom is located one-third of the way from the pivot end of its …
  5. Language Arts

    Boom, Boom- the music goes Boom, Boom- Feel the beat from head to toes Boom, Boom- my heart is thumping Boom, Boom- It's quite frightening Boom, Boom- Feel the world's weight on me Boom, Boom- Millions of eyes are staring at me Boom, …
  6. Physics

    The arm of a crane at a construction site is 13.1 m long, and it makes an angle of 20° with the horizontal. Assume that the maximum load the crane can handle is limited by the amount of torque the load produces at the base of the …
  7. Cranes

    08/09/2005 Physics A crane is lifting a 200 pound object. The crane boom is 50 ft long. The boom forms an 85 degree angle with the horizontal. What is the torque applied to the crane boom?
  8. physcis

    A crane whose motoer has a power input of 5.0kW lifts a 1200-kg load of bricks through a height 30m in 90s. Find the efficency of the crane which is the ratio between its output power and its input power
  9. Physics

    The boom of a crane is 20 m long and is inclined 20ᵒ from the horizontal. A bucket of cement with a mass of 3000 kg is suspended from the upper end of the boom. What is the torque acting on the point where the boom is attached …
  10. physics

    The torques acting on the crane boom can be computed about anaxis passing through the top of the boom. (this is the place wherethe spring scale and mass hanger connect to the boom) apply thesecond condition for equilibrium to the crane …

More Similar Questions