# p

posted by .

A square ammeter has sides of length l = 3.75 cm. The sides of the ammeter are capable of measuring the magnetic field they are subject to. When the ammeter is clamped around a wire carrying a DC current, as shown in the figure, the average value of the magnetic field measured in the sides is 2.73 G. What is the current in the wire?

## Similar Questions

1. ### Science

Can we add an ammeter to a parallel series?
2. ### Physics EM

An ammeter is connected in series to a battery of voltage V_b and a resistor of unknown resistance R_u The ammeter reads a current I_0. Next, a resistor of unknown resistance R_r is connected in series to the ammeter, and the ammeter's …
3. ### Physics

Ammeter 1 reads 0.20 A. a. What should ammeter 3 indicate?
4. ### Physics

Ammeter 1 reads 0.20 A. a. What should ammeter 3 indicate?
5. ### Physics

Ammeter 1 reads 0.20 A. a. What should ammeter 3 indicate?
6. ### engineering science

The power in a resistor RLOAD of 10 Ω when connected to a 100 volt supply is measured using a voltmeter and ammeter. There are two possible ways of connecting the meters as shown in FIGURE 2. The resistances RA and RV represent …
7. ### science

Does an ammeter consist of a loop of wire in a magnetic field?
8. ### physics

The ammeter your physics instructor uses for in class demonstrations has a resistance R(g)= 60 ohms and requires a current of 1.0 mA for a full scale deflection. The same ammeter can be used to measure currents of much greater values …
9. ### Physics

What is the maximum equipment needed to determine the power dissipated in a resistor of unknown value?
10. ### physics

When the lights of an automobile are switched on, an ammeter in series with them reads 9.70 A and a voltmeter connected across them reads 12.20 V. When the electric starting motor is also turned on, the ammeter reading drops to 7.30 …

More Similar Questions