PHYSICS

posted by .

1..........At what temperature of 0^C steel rod & copper rod have length of 80.1cm and 99.9cm respectively. At what temperature will the 2 rods have the same length.
Coefficients of linear expansion (per °C) copper rod----.000017 steel rod-------.000012

2.....The length of a brass bar increase from 4.001m into 4.0030 m. find the final temperature of the bar if the initial temperature was 0 Celsius.
Coefficients of linear expansion (per °C) brass----- .000019

  • PHYSICS -

    I will be happy to critique your work. These are straightforward uses of simple equations.

  • PHYSICS -

    Your question #1 still contains a typo error

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physic

    An aluminum rod is 10.0 cm long and a steel rod is 80.0 cm long when both rods are at a temperature of15 degrees cel. Both rods have the same diameter. The rods are joined end-to-end to form a rod 90.0 cm long. The coefficients of …
  2. PHYSICS

    1...At what temp. of 0^C steel rod and copper rod have length of 800.1 & 99.9 respectively. At what temp. will the 2 rods have the same length. coeff.of linear expansion Copper-.000017 steel-.000013 2...The length of a brass bar increase …
  3. PHYSICS

    1..........At what temperature of 0^C steel rod & copper rod have length of 800.1cm and 99.9cm respectively. At what temperature will the 2 rods have the same length. Coefficients of linear expansion (per °C) copper rod----.000017 …
  4. physics

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly against …
  5. physics

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly against …
  6. physics

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly against …
  7. physics please helpp

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly against …
  8. physics

    A steel rod of length 4 m is welded to the end of an aluminum rod of length 3 m (lengths measured at 23 °C). The combination rod is then heated to 198 °C. What is the length of the combination rod at 198 °C?
  9. physics

    A steel rod of length 1 m is welded to the end of an aluminum rod of length 2 m (lengths measured at 23 °C). The combination rod is then heated to 198 °C. What is the length of the combination rod at 198 °C?
  10. Physics

    If a rod is moving at a velocity equal to 1/2 the speed of light parallel to its length, what will a stationary observer observe about its length?

More Similar Questions