Post a New Question

physics

posted by .

The magnetic field in a loudspeaker is 0.2 T.
The wire consists of 308 turns wound on a
4.12 cm diameter cylindrical form. The resistance of the wire is 8.2 Ω.
Find the force exerted on the wire when
15.8 V is placed across the wire.
Answer in units of N

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A piece of copper wire has a resistance per unit length of 5.95 10-3 /m. The wire is wound into a thin, flat coil of many turns that has a radius of 0.200 m. The ends of the wire are connected to a 12.0 V battery. Find the magnetic …
  2. physics

    A piece of copper wire has a resistance per unit length of 6.45*10-3 /m. The wire is wound into a thin, flat coil of many turns that has a radius of 0.140 m. The ends of the wire are connected to a 12.0 V battery. Find the magnetic …
  3. college physics

    How to do this problem? Compute the number of turns of wire on a coil whose resistance measures 15.5 ohms, and which is wound around a 2-inch diameter form in a single layer of 28 gage enameled copper wire.
  4. Physics

    Two wires with the same resistance have the same diameter but different lengths. If wire 1 has length L1 and wire 2 has length L2, how do L1 and L2 compare if wire 1 is made from copper and wire 2 is made from aluminum?
  5. physics

    A flat coil of wire consisting of 56 turns, each with an area of 39 cm^2, is positioned perpendicularly to a uniform magnetic field that increases its magnitude at a constant rate from 3.1 T to 10 T in 5.7 s. If the coil …
  6. Physics

    A coil with 347 turns of wire, a total resistance of 49 Ω, and a cross-sectional area of 0.28 m2 is positioned with its plane perpendicular to the field of a powerful electromagnet. What average current is induced in the …
  7. physics

    The magnetic force on a straight 0.36 m segment of wire carrying a current of 4.5 A is 0.38 N. What is the magnitude of the component of the magnetic field that is perpendicular to the wire?
  8. physics

    As part of a class project you are given 0.900 g of nichrome and asked to fabricate a wire with uniform cross-section. You use up 95% of the nichrome and make a wire with a resistance of 0.840 Ω. The resistivity of nichrome is …
  9. Physics

    A piece of copper wire has a resistance per unit length of 5.50 x 10^-3 Ω/m. The wire is wound into a thin, flat coil of many turns that has a radius of 0.200 m. The ends of the wire are connected to a 12.0-V battery. Find the …
  10. Physics

    A solenoid is formed by winding 25.3 m of insulated silver wire around a hollow cylinder. The turns are wound as closely as possible without overlapping, and the insulating coat on the wire is negligibly thin. When the solenoid is …

More Similar Questions

Post a New Question