# PHYSICS NEED HELP FAST

posted by ricki

A 150KG STEEL ROD IN A BUILDING UNDER CONSTRUCTION SUPPORTS A LOAD OF 6050KG. DURING THE DSY THE RODS TEMP. INCREASES FROM 22C TO 47C CAUSING THE ROD TO THERMAALLY EXPAND AND RAISE THE LOAD 5.5mm. FIND THE EGERHU TRANSFER AS HEAT TO OR FROM THE ROD. THE SPECIFIC HEAT CAPACITY OF STEEL IS THE SAME AS FOR IRON.
b. FIND THE WORK DONE IN THIS PROCESS. IS WORK DONE ON OR BY THE ROD?
c. HOW GREAT IS THE CHANGE IN THE RODS INTERNAL ENERGY? DOES THE RODS INTERNAL ENERGY INCREASE OR DECREASE?

## Similar Questions

1. ### physics

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
2. ### physics

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
3. ### physics

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
4. ### physics

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
5. ### science

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
6. ### physics

A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the following …
7. ### Physics

Steel is very stiff, and the Young's modulus for steel is unusually large, 2.0×1011 N/m2. A cube of steel 25 cm on a side supports a load of 85 kg that has the same horizontal cross section as the steel cube. What is the magnitude …
8. ### physics

The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly against …
9. ### Physics (Stress & Strain)

The ultimate strength of a steel rod is 550.000MPa. If the factor of safety of 3.000 is required, what is the maximum permissible load for the rod if it has a diameter of 4.100cm?
10. ### Physics (Stress & Strain)

The ultimate strength of a steel rod is 550.000MPa. If the factor of safety of 3.000 is required, what is the maximum permissible load for the rod if it has a diameter of 4.100cm?

More Similar Questions