physcis

posted by .

In the diagram shown the pulley at frictionless and the cylindrical load weighs 800.
A. Determine the tension in the cable.
B. Determine the horizontal component of the reaction of the pin A.
C. Determine the vertical component of the reaction of the pin A.

  • physcis -

    Diagram?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. PHYSICS

    The boom crane in the diagram is in static equilibrium and weighs 2000 N with its center of gravity in the middle of its length. It is supported by a frictionless pivot at the left end and a cable connected to the center of the boom …
  2. Physics

    A 500N person stands 2.5m from a wall against which a horizontal beam is attached. The beam is 6m long and weighs 200N. A cable is attached to the free end of the beam and makes an angle of 45 to the horizontal and is attached to the …
  3. physics

    A 25 ft long crane supported at its lower end by a pin is elevated by a horizontal cable. A 250 lb load is suspended from the outer end of the crane. The center of gravity of the crane is 10 ft from the pin and the crane weighs 200 …
  4. Physics

    A 285-kg load is lifted 22.0 m vertically with an acceleration a=0.170 g by a single cable. Determine the tension in the cable. (N) Determine the net work done on the load. (J) Determine the work done by the cable on the load. Determine …
  5. Physics

    In Figure 12-74, a uniform beam of length 11.7 m is supported by a horizontal cable and a hinge at angle θ = 52.7°. The tension in the cable is 444 N. What are (a) the x-component and (b) the y-component of the gravitational …
  6. PHysics

    A 250 kg load is lifted 23 m vertically with an acceleration a = 0.185g by a single cable Determine the tension of the cable. =2900N Determine the net work done on the load. =?
  7. Physics

    I need a step by step visual of how to do this question: A uniform horizontal beam 5.00m long and weighing 3.00x10^2 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that …
  8. Physics

    When the motor in the figure below raises the m = 1010kg mass, it produces a tension of 1.04E+4N in the cable on the right side of the pulley. The pulley has a moment of inertia of 78.9kgm^2 and a radius of 0.736m. The cable rides …
  9. physics

    A 1400-N uniform boom at ϕ = 70.0° to the horizontal is supported by a cable at an angle θ = 20.0° to the horizontal as shown in the figure below. The boom is pivoted at the bottom, and an object of weight w = 2250 N hangs …
  10. physics

    A 1400-N uniform boom at ϕ = 70.0° to the horizontal is supported by a cable at an angle θ = 20.0° to the horizontal as shown in the figure below. The boom is pivoted at the bottom, and an object of weight w = 2250 N hangs …

More Similar Questions