# Physics

posted by .

use two 100-ohm resistors, two 20-ohm resistors and two 47-ohm resistors in any combination to get any of these currents......
a) I=0.015 A
b) I=0.031 A
c) I=0.064 A
d) I=0.6 A

• Physics -

To solve this, you need to know the EMF.

## Similar Questions

A total resistance of 3 ohms is to be producd by combining an unknown resistor R with a 12 ohm resistor. What is the value of R and how is it connected to the 12 ohm resistor a) 4.0 ohm parallel b) 4.0 ohm in series c) 2.4 ohm in parallel …

Four 20 ohm resistors are connected in parallel and the combination is connected to a 20 V emf device. The current in any one of the resistors is: A) 0.25 A B) 1.0 A C) 4.0 A D) 5.0 A E) 100 A I get B V=IR I= 20V/20 ohms = 1 A for …
3. ### physics

This is going to be hard to explain, but here goes! Four resistors, R1 = 30.0 ohm, R2 = 52.0 ohm, R3 = 93.0 ohm and R4 = 17.0 ohm, are connected to a battery with a terminal voltage of 18.0 V, as shown in the figure below. ____R1____R2__________ …
4. ### College physics

What is the potential difference across the 10 and 20 ohm resistor in the figure there is a battery of 15V with two in series resistors of 10 Ohm and 20 ohm
5. ### physics

The load across a 12 V battery consists of a series combination of three resistors 21 ohm, 22 ohm, and 56 ohm. What is the total resistance of the load?
6. ### physics

The load across a 12 V battery consists of a series combination of three resistors 21 ohm, 22 ohm, and 56 ohm. What is the total resistance of the load?
7. ### physics

a 100 V DC signal is applied to four resistors as shown in Fig. 5. The values of the resistors are 20 ohm, 40 ohm, 60 ohm and 80 ohm. What is the voltage across the 40 ohm resistor?
8. ### maths

if two resistors of r1 and r2 ohms are connected in parallel in an electriccircuit to make a R ohm resistor, the value of R can be found from the equation 1/R= 1/r1+ 1/r2. if r1 is decreasing at the rate of 1 ohm/s and r2 is increasing …
9. ### physics

the effective resistacce of two resistors connected in series is 100 ohm.when it connected in parallel it is 24 ohm.determine the values of two resistors
10. ### Physics

Two resistors, 6 ohms and 18 ohms are connected in parallel and the combination is connected in series with a 2 ohm resistor. Find the current through each of the first two resistors if the current through the 2 ohm resistor is 1.2 …

More Similar Questions