Math
posted by Keisha .
A sheet metal plate has the length of 147.5 mm and a width of 86.5 mm. Find its area in m^2.

convert length, width to meters, then multiply.
Respond to this Question
Similar Questions

Math
A piece of metal is bent into a rectangle and has a length which is 5 times as long as its width. If the perimeter of the piece of metal is 13 feet 6 inches, find the length and the width of the piece of sheet metal. You must use a … 
math
A rectangular sheet of metal, of area 440 sq.cm is folded into a cylinder, to enclose a volume of 1540 cu.cm. A circle whose diameter is equal to the width of the rectangular sheet is cut from the sheet. Find the ratio of the area … 
math (calculus)
A rectangular sheet of paper of width a and length b, where 0<a<b, is folded by taking one corner of the sheet and placing it at point P on the opposite long side of the sheet. The fold is flatened to form a crease across the … 
math
a rectangular sheet metal plate has a length of 147.5mm and a width of 86.5mm. what is its area in mm^2? 
Math
The area of a rectangle is shown below The area of the rectangle is 56 Which of the following are possible values for the length and width of the rectangle? 
Chemistry (Electrochemistry)
The thickness of a pure Ag plate on a base metal is to be determined by controlled potential coulometry. The metal sheet is masked except for a circular area, 0.5cm in diameter. Electrical connection is made to the metal and the sheet … 
math
The length, breadth and height of a closed box are respectively 2m, 1.5m and 0.8m. Find the total area of canvas required to cover itup. Find also the cost of canvas if 1sq m of canvas costs Rs. 30. A rectangular box without lid is … 
math
a cylindrical vessel without lid is made from a sheet of metal find the area of metal required if the length of the vessel is 35cm and its diameter is 28cm. 
math
A picture is copied onto a sheet of paper 8 inches by 10 inches. A 2inch margin is left all around the picture. Find the length, width, and area of the picture. Length = 10 inches Width = 8 inches Area = 80 inches squared am i right? 
math
A rectangular piece of sheet metal is 4 ft longer than it is wide. (See the illustration.) The area of the piece of sheet metal is 96 ft2. Find its length and width