posted by .

an immersion heat can supply heat at a rate of 5.2 x 10 to the power of 2 joules per second. calculate the time that it wil take to completly evaporate 1.25 x 10 to the power of minus 1 kg water initially at a temperature of 21 degrees celsius

  • physics -

    Power*time= Heat= Mass*Hvwater + Mass*(100-21)*specific heat of water.

    Watch specific heat, heat of vaporization units, make certain they match your mass units.
    Solve for time.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. science

    How do i calculate how much time it takes to heat water?
  2. physics-energy conservation

    a mordern power station,or, more correctly, an energy station, converts heat energy into electrical energy at an efficiency od 50% if the station produces electrical energy at a rate of 1.00GW from burning coal, calculate the mass …
  3. Physics

    A portion of an electric circuit connected to a 7 ohm resistor is embedded in 1.20 kg of a solid substance in a calorimeter. The external portion of the circuit is connected to a 100 volt power supply. (a) Assuming that all the heat …

    A power plant has a power output of 1055 MW and operates with an efficiency of 33.0 percent. Excess energy is carried away as heat from the plant to a nearby river that has a flow rate of 1.1 x 10^6 kg/s. How much energy is transferred …
  5. physics

    Suppose that you want to freeze 1.2 kg of water for a party, and only have 10 minutes to do it. Relying on nothing but your keen physical abilities, a dixie cup, duct tape and a piece of string, you manage to build a refrigerator unit …
  6. Physics

    A fossil-fuel power plant that generates 1000MW of electrical power discharges 1600MJ per second as waste heat into the river. A)At what rate(in MW) is thermal energy obtained fromt the burning of coal?
  7. Physics

    A circuit consists of a resistor of R=7 Ω, a capacitor of C=7 μF, and an ideal self-inductor of L=0.04 H. All three are in series with a power supply that generates an EMF of 5sin(ωt) Volt. The internal resistance of …
  8. physics

    a. A power plant burns coal and generates an average of 610.0 Megawatts (MW) of electrical power while discharging 915.00 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period. b. Coals vary a …
  9. Science: Physics

    We use an electric immersion heater to heat 2,0 liters water having temperature of 20C to the boiling point. Specific heat capacity of water is 4,19 kJ/(kg c). The power of the heater is 1,50 kW and efficiency of heating is 80 %. …
  10. Physics!

    At a steam power plant, steam engines work in pairs, the output of heat from one being the approximate heat input of the second. The operating temperatures of the first are 520°C and 320°C, and of the second 310°C and 170°C. If …

More Similar Questions