physics

from a disk of radius R,a concentric circular portion of radius r is cut out so as to leave an annular disc of mass M . the moment of inertia of this annular disc about the axis perpendicular to its plane and passing through its centre of gravity is

  1. 👍 0
  2. 👎 1
  3. 👁 365
  1. The answer will be M/2(R2+r2)

    1. 👍 0
    2. 👎 1

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A bicycle is rolling down a circular portion of a path; this portion of the path has a radius of 8.73 m. As the drawing illustrates, the angular displacement of the bicycle is θ = 0.979 rad. What is the angle (in radians) through

  2. Math

    A cone is constructed by cutting a sector from a circular sheet of metal with radius 20cm. The cut sheet is then folded up and welded. Find the radius and height of the cone with the maximum volume that can be formed in this way.

  3. Physics

    A small disk of radius R1 is mounted coaxially with a larger disk of radius R2. The disks are securely fastened to each other and the combination is free to rotate on a fixed axle that is perpendicular to a horizontal frictionless

  4. Physics

    A circular track has several concentric rings where people can run at their leisure. Phil runs on the outermost track with radius rP while Annie runs on an inner track with radius rA = 0.90 rP. The runners start side by side,

  1. science

    A circular disk of 10 cm radius is charged uniformly with a total charge of Q coul. Find the electric field intensity at a point 20 cm away from the disk, along its axis. (b) Consider a uniformly charged right circular cylindrical

  2. Physics

    A flat uniform circular disk (radius = 2.10 m, mass = 1.00 102 kg) is initially stationary. The disk is free to rotate in the horizontal plane about a frictionless axis perpendicular to the center of the disk. A 40.0-kg person,

  3. physics

    A uniformly charged disk of radius 35.0 cm carries a charge density of 6.70 multiplied by 10-3 C/m2. Calculate the electric field on the axis of the disk at the following distances from the center of the disk. (a) 5.00 cm

  4. physics

    A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk.

  1. Math

    A circular pizza of radius 8 is cut into 8 equal slices. What is the perimeter of one slice?

  2. PreCalculus

    Cone Problem Beginning with a circular piece of paper with a 4- inch radius, as shown in (a), cut out a sector with an arc of length x. Join the two radial edges of the remaining portion of the paper to form a cone with radius r

  3. physics

    A circular disk of 10cm radius is charged uniformly with a total charge of Q. Find the electric field intensity at a point 20cm away from the disk along its axis

  4. Physics

    The figure shows three rotating, uniform disks that are coupled by belts. One belt runs around the rims of disks A and C. Another belt runs around a central hub on disk A and the rim of disk B. The belts move smoothly without

You can view more similar questions or ask a new question.