physics

A certain elevator car has mass 2200 kg and is lifted by cables driven by an electric motor. The efficiency of the lift system (motor, pulleys, cable, etc.) is 67.0%. As the elevator car moves at constant speed of 3.0 m/s it encounters 220N of friction coming from its tracks. Determine the electrical power requirement for this system as it lifts the car.

  1. 👍 0
  2. 👎 0
  3. 👁 276
  1. what is 1/.67 *( 2200*g+220)3 watts

    1. 👍 0
    2. 👎 0
  2. Calculate the number of joules of kinetic energy a 1kg parrot has when it flies at 6 m/s

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    An elevator in a tall building is allowed to reach a maximum speed of 3.3 m/s going down. What must the tension be in the cable to stop this elevator over a distance of 3.4 m if the elevator has a mass of 1330 kg including

  2. Physics

    A loudspeaker of mass 25.0 kg is suspended a distance of 1.00 m below the ceiling by two cables that make equal angles with the ceiling. Each cable has a length of 2.50 m . What is the tension in each of the cables?

  3. science

    Now, three masses (m1 = 3.1 kg, m2 = 9.3 kg and m3 = 6.2) hang from three identical springs in a motionless elevator. The springs all have the same spring constant given above. Now the elevator is moving downward with a velocity

  4. physics

    An elevator is being lifted up an elevator shaft at a constant speed by a steel cable. All fricional effects are negligible. In this situation,forces on the elevator are such that?: A.the upward force by the cable is greater than

  1. physics

    Your engineering firm is asked to specify the maximum load for the elevators in a new building. Each elevator has mass 500 kg when empty and maximum acceleration 2.25 m/s^2. The elevator cables can withstand a maximum tension of

  2. Physical Science

    Two objects were lifted by a machine. One object had a mas of 2 kilograms, and was lifted at a speed of 2 m/sec. The other had a mass of 4 kilogram was lifted at a rate of 3 m/sec. ------------------------------------------- a)

  3. Physics

    A loudspeaker of mass 16.0 kg is suspended a distance of h = 2.00 m below the ceiling by two cables that make equal angles with the ceiling. Each cable has a length of l = 2.90 m What is the tension T in each of the cables? Use

  4. Physics

    Safety engineers estimate that an elevator can hold 20 persons of 65 kg average mass. The elevator itself has amass of 450 kg. Tensile strength tests show that the cable supporting the elevator can tolerate a maximum force of

  1. Physics

    A tension of 6000 newtons is experienced by the elevator cable of an elevator moving upward with an acceleration of 2m/s^2. what is the mass of the elevator

  2. Physics

    fully loaded, slow-moving freight elevator has a cab with a total mass of 1250 kg, which is required to travel upward 58 m in 3.4 min, starting and ending at rest. The elevator's counterweight has a mass of only 1005 kg, and so

  3. analytic geometry

    The main cables of a suspension bridge uniformly distribute the weight of the bridge when in the form of a parabola. The main cables of a particular bridge are attached to towers that are 600 ft apart. The cables are attached to

  4. physics

    A loaded elevator with very worn cables has a total mass of 1800 kg and the cavles can withstand a maximusm tension of 28000N a) What is the maximum upward acceleration for the elevator if the cables are not to brake? b) What is

You can view more similar questions or ask a new question.