# Physics

Two blocks, with masses M1 = 1.4 kg and M2 = 9.9 kg, and a spring with spring constant k = 228 N/m are arranged on a horizontal, frictionless surface. The coefficient of static friction between the two blocks is 0.59. What is the maximum possible amplitude of the simple harmonic motion if no slippage is to occur between the blocks?

1. 👍
2. 👎
3. 👁
1. 78

1. 👍
2. 👎

## Similar Questions

1. ### science

Two blocks of masses m and M are suspended as shown above by strings of negligible mass. If a person holding the upper string lowers the blocks so that they have a constant downward acceleration a, the tension in the string at

2. ### physics

The masses of blocks A and B are 4.5 kg and 3.7 kg respectively. The blocks are initially at rest and are connected by a massless string passing over a massless, frictionless pulley. The system is released from rest. a. What is

3. ### Physics

In Figure 9-61, block 1 (mass 2.0 kg) is moving rightward at 8 m/s and block 2 (mass 4.8 kg) is moving rightward at 2.8 m/s. The surface is frictionless, and a spring with spring constant of 1180 N/m is fixed to block 2. When the

4. ### physics

two blocks having masses m1 2 kg and m2 4 kg are connected by a string passing over a pulley as shown in the figure the puelley has a radius R = 0.1 m and moment of inerita l = 20 kg m^2 about its axis of rotation the stirng does

1. ### Mechanics

A 30.0-kg block is resting on a flat horizontal table. On top of this block is resting a 15.0-kg block, to which a horizontal spring is attached, as the drawing illustrates. The spring constant of the spring is 325 N/m. The

2. ### physics

Two blocks of masses m1 and m2 approach each other on a horizontal table with the same constant speed, v0, as measured by a laboratory observer. The blocks undergo a perfectly elastic collision, and it is observed that m1 stops

3. ### Differential Equations

Consider the spring - mass system, shown in Figure 4.2.4. consisting of two unit masses suspended from springs with spring constants 3 and 2, respectively. Assume that there is no damping in the system. Show that the displacements

two blocks of masses m1 and m2 (m1>m2) are placed on a frictionless table in contact with each other. A horizontal force of magnitude F is applied to the block of mass m1. if P is the magnitude of the contact force between the

1. ### physics

blocks 1 and 2 of masses 2 kg and 4kg, respectively, are connected by a light string, as shown above. These blocks are further connected to a block of mass 3kg by another light string that passes overr a pully of negligible mass

2. ### physics

Two blocks of masses M and 3M are placed on a horizontal, frictionless surface. A light spring is attached to one of them, and the blocks are pushed together with the spring between them as shown in the figure below. A cord

3. ### college physics

Two blocks with masses m and M are pushed along a horizontal frictionless furface by a horizontal applied force. The magnitude of the force either of these blocks has on the other is: M being a bigger mass than m of course. I

4. ### physic

Two equal masses are attached to separate identical springs next to one another. One mass is pulled so its spring stretches 20 cm and the other is pulled so its spring stretches only 10 cm. The masses are released