physics

The figure shows two 1.00kg blocks connected by a rope. A second rope hangs beneath the lower block. Both ropes have a mass of 250g . The entire assembly is accelerated upward at 3.00m/s2 by force F.
What is F?
What is the tension at the top end of rope 1?
What is the tension at the bottom end of rope 1?
What is the tension at the top end of rope 2?

  1. 7
asked by Anonymous
  1. ?
    ?
    ?
    ?

    posted by Anonymous
  2. dx

    posted by Anonymous
  3. dxdx

    posted by Anonymous
  4. retards, sovle the question ur self

    posted by you are retard

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics - URGENT

    Two blocks are connected by a heavy uniform rope with a mass of 4.00 . The topblock is 6.00kg, the bottom block is 5.00kg with an applied upwardforce of 200 N. What is the tension at the midpoint of the rope?
  2. Physics

    the coefficient of kinetic friction between both blocks and the table is .200. determine the accelerations of blocks A and B each of which has a mass of 5.0kg The diagram shows a table with two blocks labeled A and B on them. A is
  3. physic

    Two blocks are connected by a rope that passes over a massless and frictionless pulley as shown in the figure below. Given that m1 = 18.04 kg and m2 = 10.57 kg, determine the magnitudes of the tension in the rope and the blocks'
  4. kjkj

    A gymnast of mass 56.0kg hangs from a vertical rope attached to the ceiling. You can ignore the weight of the rope and assume that the rope does not stretch. Use the value 9.81m/s2 for the acceleration of gravity.Calculate the
  5. physics

    A gymnast of mass 61.0 kg hangs from a vertical rope attached to the ceiling. You can ignore the weight of the rope and assume that the rope does not stretch. How do I calculate the tension T in the rope if the gymnast hangs
  6. Physics

    Two blocks are fastened to the ceiling of an elevator as in Figure P4.19. The elevator accelerates upward at 2.00 m/s2. The blocks both have a mass of 14.0 kg. Find the tension in each rope. top rope: bottom rope:
  7. physics

    Blocks A, B, and C are placed as in the figure and connected by ropes of negligible mass. Both A and B weigh 27.5 each, and the coefficient of kinetic friction between each block and the surface is 0.40. Block C descends with
  8. science

    In the system shown in the figure , block A has mass m_A = 2.08 kg, block B has mass m_B = 0.370 kg, and the rope connecting them has a nonzero mass 0.203 kg. The rope has a total length 1.03 m and the pulley has a very small
  9. Physics

    Problem 3- Blocks A, B, and C are connected by ropes and placed as in the figure. Both A and B weigh 22.6 N each, and the coefficient of kinetic friction between each block and the surface is 0.40. Block C descends with constant
  10. physic

    A block with mass m1 hangs from a rope that is extended over an ideal pulley and attached to a second block with mass m2 that sits on a ledge. The second block is also connected to a third block with mass m3 by a second rope that

More Similar Questions