# physics

A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk. Find the moment of inertia of this disk (with off-center hole) when rotated about its center, C.

Hint: Consider a solid disk and subtract the hole; use parallel-axis theorem.

1. 👍 0
2. 👎 0
3. 👁 1,282
1. The moment of inertia of the disc before the hole is drilled is
I0 = (1/2) M R0^2.

From that, SUBTRACT the moment of inertia of what the hole would be, if it were solid and displaced h from the center.
Its mass would be m = M(R1/R2)^2
Using the parallel axis theorem, its moment of inertia would be
I' = (1/2)m R1^2 + m h^2.

Subtract I' from I0 for the answer. Don't forget to substitute M(R1/R0)^2 for m.

1. 👍 0
2. 👎 0
2. much thanks!

1. 👍 0
2. 👎 0

## Similar Questions

1. ### Physics

I already figured out the answers to some but I need help with two more. 1) A disk with an initial angular velocity ω0 = 4.5 rad/s experiences a constant angular acceleration of α = 7.5 rad/s2 for time t = 15 s. Please answer

2. ### Physics

Figure 10-42 shows a uniform disk that can rotate around its center like a merry-go-round. The disk has a radius of 2.00 cm and a mass of 20.0 grams and is initially at rest. Starting at time t = 0, two forces are to be applied

3. ### college physics

A 0.50-kg block slides along a small track with elevated ends and a flat central part. The flat part has a length L = 1.85 m. The curved portions of the track are frictionless, but for the flat part the coefficient of kinetic

4. ### Physics

A non-rotating cylindrical disk of moment of inertia I is dropped onto an identical disk rotating at angular speed w. Assuming no external torques, what is the final common angular speed of the two disks?

1. ### Physics

A flat uniform circular disk (radius = 2.10 m, mass = 1.00 102 kg) is initially stationary. The disk is free to rotate in the horizontal plane about a frictionless axis perpendicular to the center of the disk. A 40.0-kg person,

2. ### Physics

A uniform disk with mass m = 8.54 kg and radius R = 1.35 m lies in the x-y plane and centered at the origin. Three forces act in the +y-direction on the disk: 1) a force 333 N at the edge of the disk on the +x-axis, 2) a force 333

3. ### physics

A children's merry-go-round in a park consists of a uniform 200kg disk rotating about a vertical axis. the radius of the disk is 6 m and a 100kg man is standing on the outer edge when the disk is rotating at a speed of 0.20rev/s.

4. ### Physics

A uniform disk with mass m = 9.42 kg and radius R = 1.31 m lies in the x-y plane and centered at the origin. Three forces act in the +y-direction on the disk: 1) a force 315 N at the edge of the disk on the +x-axis, 2) a force 315

1. ### Physics

A solid disk rotates in the horizontal plane at an angular velocity of 0.0684 rad/s with respect to an axis perpendicular to the disk at its center. The moment of inertia of the disk is 0.190 kg·m2. From above, sand is dropped

2. ### Physics

The figure shows three rotating, uniform disks that are coupled by belts. One belt runs around the rims of disks A and C. Another belt runs around a central hub on disk A and the rim of disk B. The belts move smoothly without

3. ### maths-surface area

Cylindrical groove is made in a cylindrical piece of wood of length 17.5cm. The groove is filled with graphite and the cylindrical graphite block is of same length as that of wooden piece. If the diameter of the graphite cylinder

4. ### Physics

A 400 kg solid metal disk (with uniform density) has several forces applied to it, as shown. If the rotation axis is through the center of the disk, then what is the angular acceleration of the disk?