college trig

find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm

  1. 👍
  2. 👎
  3. 👁
  4. ℹ️
  5. 🚩
  1. arc/circumference = angle/360°

    37.3/2πr = 108.03/360
    2πr(108.03) = 37.3(360)
    r = 19.783 mm

    1. 👍
    2. 👎
    3. ℹ️
    4. 🚩

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    The three blocks shown are released from rest and are observed to move with accelerations that have a magnitude of 1.5 m/s^2. Disregard any pulley mass or friction in the pulley and let M = 2 kg. a) What is the magnitude of the

  2. mathematics

    The radius of a pulley is 164 mm. Find the circumference of the pulley.

  3. physics

    A pulley rotating in the counterclockwise direction is attached to a mass suspended from a string. The mass causes the pulley's angular velocity to decrease with a constant angular acceleration α = -2.2 rad/s2. If the pulley's

  4. Physics please help! check if its correct

    A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner diameter of the pulley is 60.0 cm, while the outer diameter is 1.00 m. The system is released from

  1. Physics

    A 3.30-kN piano is lifted by three workers at a constant speed to an apartment 28.8 m above the street using a pulley system fastened to the roof of the building. Each worker is able to deliver 197 W of power, and the pulley

  2. Trig

    assume a pulley has a radius of 12.96 cm. If it takes 18 seconds for 56 cm of belt to go around the pulley, find the angular velocity in radians per seconds

  3. Need help at this very minute with physics

    In Figure 10-53, two blocks, of mass m1 =400 g and m2 =600 g, are connected by a massless cord that is wrapped around a uniform disk of mass M = 500 g and radius R = 12.0 cm. The disk can rotate without friction about a fixed

  4. math

    The radius of a pulley is 161 mm. Find the circumference of the pulley.

  1. dynamics

    13. The constant angular acceleration of a pulley is 4 rad/s2 and its angular speed its 3 rad/s. Determine the radius of the pulley if the total acceleration of a print on the rim of the pulley is 3.5m/s2.

  2. Trig

    Two pullies are connected by a belt, Pulley A has a radius of 3 cm and pulley B has a radius of 6cm. As Pulley A rotates, a drop of paint on the circumference of pulley B rotates around the axle of Pulley B. Initially the paint

  3. physics

    A rope goes over a circular pulley with a radius of 6.3 cm. If the pulley makes four revolutions without the rope slipping, what length of rope passes over the pulley?

  4. physics

    Did I do a) and b) right? The three blocks shown are released from rest and are observed to move with accelerations that have a magnitude of 1.5 m/s2. Disregard any pulley mass or friction in the pulley and let M = 2 kg. a) What

View more similar questions or ask a new question.