two cylindrical tanks have the same height, but the radius of one tank equals the diameter of the other. if the volume of the larger is k% more than the volume of the smaller, k= ?


small tank volume: pi*(r/2)^2*h
big tank volume: pi*r^2*h

factor small volume out =

since big volume is 4 times as the small one, it's 300% more.
(4 is 3 more than 1).

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. math

    The given cylindrical container r =3 inches and height= 8in is used to fill the rectangular prism fish tank 24 , 24 and 12 inches with water. What is the least number of full cylindrical needed to completely fill the fish tank?


    A cylindrical oil storage tank 12 feet in diameter and 17feet long is lying on its side. Suppose the tank is half full of oil weighing 85 lb per cubic foot. What's the total force on one endof the tank?

  3. math

    (1)How much water can be held by a cylindrical tank with a radius of 12 feet and a height of 30 feet. (2)The diameter of a frisbee is 12 inches, what is the area of the frisbee

  4. math

    A cylindrical water tank has a diameter of 1.2 m and a height of 1.5 m.How many liters of water can it hold the nearest liter?


    Water is draining from a small cylindrical tank into a larger one below it. The small cylindrical tank has a radius of 4 feet and a height of 6 feet; the large cylindrical tank has a radius of 8 feet and a height of 16 feet. The

  2. math

    A cylindrical tank of diameter 4m contains water to a height of 3 m.What area of the surface is wet? any idea please

  3. numerical methods

    Consider a spherical storage tank containing oil. The tank has a diameter of 8 ft. You are asked to calculate the height h to which a dipstick 10 ft long would be wet with oil when immersed in the tank when it contains 6 3 ft of

  4. physics

    a cylindrical storage tank has a radius of 1.05m. when filled to a height of 3.79m, it holds 13500kg of a liquid industrial solvent. what is the density?

  1. Physics II

    A large cylindrical water tank 11.5 m in diameter and 13.5 m tall is supported 8.75 m above the ground by a stand. The water level in the tank is 10.6 m deep. The density of the water in the tank is 1.00 g/cm3. A very small hole

  2. Calculus

    A cylindrical tank is to have a capacity of 1000 m³. It is to fit into a foundry that is 12 m wide with a height of 11 m. The base of the tank will cost half as much as the top. The metal for the side of the tank will cost four


    A cylindrical tank if 8 ft. in diameter and 20 ft tall. how many gallons of paint are needed to paint the tank if one gallon covers 200 sq ft ? and a cylindrical hole with diameter 8 inches is cut through a cube 10 in. on a side.

  4. Calculus

    Water is running into an open conical tank at the rate of 9 cubic feet per minute. The tank is standing inverted, and has a height of 10 feet and a base diameter of 10 feet. At what rate is the radius of the water in the tank

You can view more similar questions or ask a new question.