Physics!

The steel I-beam in the drawing has a weight of 9.03 × 103 N and is being lifted at a constant velocity. What is the tension in each cable attached to its ends?

With both angles being 70 degrees

  1. 👍 0
  2. 👎 0
  3. 👁 115

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    The steel I-beam in the drawing has a weight of 5.22 × 103 N and is being lifted at a constant velocity. What is the tension in each cable attached to its ends?

    asked by Erik on October 30, 2015
  2. physics

    The steel I-beam in the drawing has a weight of 1.53 × 103 N and is being lifted at a constant velocity. What is the tension in each cable attached to its ends?

    asked by Anonymous on October 7, 2015
  3. physics

    The steel I-beam in the drawing has a weight of 1.75 × 103 N and is being lifted at a constant velocity. The angles are at 70 degrees. What is the tension in each cable attached to its ends?

    asked by Kristyn on March 28, 2015
  4. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the

    asked by Student on October 8, 2007
  5. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the

    asked by Bourne on October 8, 2007
  6. Physics Classical Mechanics

    A uniform steel beam of mass m1= 300.0 kg is held up by a steel cable that is connected to the beam a distance L= 5.0 m from the wall, at an angle θ= 40.0∘ as shown in the sketch. The beam is bolted to the wall with an unknown

    asked by A on November 26, 2013
  7. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the

    asked by Student on October 9, 2007
  8. physics

    The steel I-beam in the drawing has a weight of 7.10 kN and is being lifted at a constant velocity. What is the tension in each cable attached to its ends? (Assume α = 70.8°.)

    asked by mk on September 20, 2014
  9. mechanics of materials

    A steel beam with a rectangular cross section is bent to form an arc of a circle of radius 6 m. Calculate the maximum stress in the beam given that the depth of the beam is 6 mm and the Young's modulusfor steel is 210 MPa

    asked by dmkp on January 28, 2013
  10. Physics

    a uniform beam 6.0m long and weighing 4kg rest support p and q place left and right 1.0m of beam of weight from each of the beam weight of mass 10kg and 8kg and are placed near p and q respectively on each of the beam. calculate

    asked by Olalekan on February 23, 2017

More Similar Questions