physics

A gyroscope consists of a rotating uniform disk with a 60-cm radius, suitably mounted at one end of a 15-cm-long axle (of negligible mass) so that the gyroscope can spin and precess freely. Its spin rate is 1540-rev/min. What is the rate of precession if the axle is supported at the other end and is horizontal?

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk.

  2. Physics

    A small disk of radius R1 is mounted coaxially with a larger disk of radius R2. The disks are securely fastened to each other and the combination is free to rotate on a fixed axle that is perpendicular to a horizontal frictionless

  3. HS physics

    A drawing shows a device that can be used to measure the speed of a bullet. The device consists of two rotating disks, separated by a distance of d = 0.790 m, and rotating with an angular speed of 65.0 rad/s. The bullet first

  4. physics

    a uniform disk of mass 3kg and radius 12cm rotates at 480 rev/min. find its kinetic energy (Hint : I of uniform disk =1/2MR2)

  1. Physics 203 ( College)

    A disk of radius 12 cm, initially at rest, begins rotating about its axis with a constant angular acceleration of 7.8 rad/s2. What are the following values at t = 4.0 s? (a) the angular velocity of the disk (b) the tangential

  2. Physics

    A uniform disk of radius 0.45 m is mounted on a frictionless, horizontal axis. A light cord wrapped around the disk supports a 1 kg object, as shown. When released from rest the object falls with a downward acceleration of 4.5

  3. Physics

    A student places an object with a mass of 100 g on a disk at a position 0.75 m from the center of the disk. The student starts rotating the disk. When the disk reaches a speed of 0.8 m/s, the object starts to slide off the disk.

  4. Physics 121

    The disk has mass 10kg and radius 0.25m. The rod has mass 5kg, length 0.5m and radius 0.05m. The rod is split down the middle and is hinged so that its two halves can lay flat against the disk. Suppose that the disk and rod are

  1. physics

    A torque of 12 N ∙ m is applied to a solid, uniform disk of radius If the disk accelerates at what is the mass of the disk?

  2. physics

    A potter's wheel is rotating around a vertical axis through its center at a frequency of 1.8rev/s . The wheel can be considered a uniform disk of mass 4.7kg and diameter 0.34m . The potter then throws a 3.1kg chunk of clay,

  3. Physics

    A solid disk rotates in the horizontal plane at an angular velocity of 0.0684 rad/s with respect to an axis perpendicular to the disk at its center. The moment of inertia of the disk is 0.190 kg·m2. From above, sand is dropped

  4. Physics

    A penny is placed on a disk that is rotating at 2 revolutions per second. The coefficient of friction between the penny and the disk is 0.4. What is the maximum radius at which the penny will stay on the disk? a. 2.5cm b. 100cm c.

You can view more similar questions or ask a new question.